TROUBLESHOOTING FOR THE |
|
HARDWARE |
|
This chapter describes how to troubleshoot the problems with paper, toner and other finishing processes. |
|
This chapter also describes how to supply the paper, toner and staples. |
|
Messages Displayed on the Touch Panel | 8 |
Clearing a Paper Jam | 11 |
Locating a paper jam | 11 |
Clearing a paper jam | 12 |
Paper jam in the Reversing Automatic Document Feeder | 13 |
Paper jam in the External Large Capacity Feeder (optional) | 15 |
Paper jam in the drawer feeding portion | 17 |
Paper jam in the bypass tray | 18 |
Paper jam in the right side of the equipment | 18 |
Paper jam in the duplexing unit | 21 |
Paper jam in the Finisher and the Hole Punch Unit (both optional) | 22 |
Paper jam in the Saddle Stitch unit (optional) | 26 |
Paper jam in the receiving unit | 30 |
Paper jam in the bridge unit | 32 |
Clearing paper jams caused by a wrong paper size setting | 33 |
Clearing paper jams caused by a wrong paper type setting | 38 |
Clearing a Staple Jam | 42 |
Staple jam in the Finisher | 42 |
Staple jam in the Saddle Stitch unit | 43 |
Replacing a Toner Cartridge | 46 |
Replacing a “Near Empty” toner cartridge | 49 |
Replacing the Waste Toner Box | 52 |
Refilling With Staples | 54 |
Refilling the Finisher staples | 54 |
Refilling the Saddle Stitch unit staples | 55 |
Cleaning the Hole Punch Dust Bin | 58 |