1 TROUBLESHOOTING FOR THE HARDWARE
8 Close the upper receiving tray of the Finisher. Place your hands on the near and far side of the lever and push to close the tray until it clicks.
Be careful not to let your fingers be caught between the
Finisher body and the upper receiving tray.
You can close it by pressing the right side of the lever with your hand.
9
10
Lower the shutter of the paper exit portion to open it.
Remove the jammed paper.
11 Close the front cover first, and connect the Finisher to the equipment.
Move the Finisher slowly placing your hands on the positions shown in the figure.
Be careful not to let your fingers be caught between the Finisher and the equipment.