Avaya 12 manual Switch compatibility, Hardware additions

Page 9

Switch compatibility

Switch compatibility

CMS R12 does not support R7 and earlier switches. When upgrading to CMS R12, the switch must be at least R8 or later. If the current switch is administered in CMS as R7 or earlier, the upgrade extract tool will recognize this incompatibility and require you to select a newer switch model before the upgrade can continue.

CMS R12 does not support X.25 switch links. The upgrade extract tool will recognize this incompatibility and require you to enter a host name or IP address and TCP port before the upgrade can continue. Determine the host name or IP address and TCP port before you begin the upgrade.

Note:

If the host name or IP address and TCP port information is not known during the CUE upgrade, you can enter fictitious information to get through the upgrade, but the switch links will not become active until you go back and update the switch setup information with accurate information.

Hardware additions

Avoid hardware additions whenever possible during an upgrade. For example, if the customer wants to increase the amount of RAM that is in the computer, add it only after verifying that the upgrade was successful. Install the RAM as described in the maintenance and troubleshooting document for the computer.

Issue 1.0 December 2003 9

Image 9
Contents Avaya Call Management System CMS Comments Preface Installing CMS patches Copying customer data Related documents OverviewSupport Frequently asked questions FAQsCustomer support for the United States Technician support for the United StatesPreparing for the upgrade Required documentation Remote supportTrouble escalation Hardware additions Switch compatibilitySoftware considerations Customization issuesDisk mirroring Parts listCMS CD-ROM Checking for printer requests and large mail filesChecking for ACD More /etc/hosts Ls -l /etc/hostsIssue 1.0 December 2003 Page Extracting the customer’s administration and options Cvueextract Error Tail -f /var/tmp/new/var/log/cvuelog Following message about supported tape drives is displayedTo add temporary ACD Enter cmsadm Extracting the customer’s administration and options Following message is displayed Extracting the customer’s administration and options Nnnnn blocks Following messages are displayed and you continue with Step Isql will not be installed in the upgraded system Odbc will be installed Pg /var/tmp/new/var/log/cvuelog Usr/sbin/shutdown -y -i0 -g0 Ls -l /dev/dsk/c0t0d0s0Prerequisites Removing and replacing disk drivesRemoving and labeling the old disk drives Disk upgrade proceduresDisk upgrade procedures Installing the new boot disk drive Booting up the system with the new boot disk drive Boot /sbus@3,0/SUNW,socal@d,10000/sf@0,0/ssd@0,0 -ar Boot /sbus@2,0/SUNW,socal@d,10000/sf@0,0/ssd@0,0 -arEnter pkginfo -x cms Press Enter to accept the default valueChecking the status of the boot disk drive Opt/informix/bin/setenvOnstat -d egrep On-Line Verifying that the upgrade can continue Checking the status of the tape drivesLs -l /dev/rmt/*mbn wc -l Page Procedure Procedure Installing CMS patches Eject cdromEtc/init.d/volmgt stop Etc/init.d/volmgt start Page Cvuecopy Copying customer dataCD-ROM Verifying files using pkgchk Cd /cdrom/cdrom0 Comparing directory and file permissionsVerifyfileproperties Nohup ./verifyfileproperties /nohup.outLn -s ./inet/hosts /etc/hosts Linking the /etc/hosts filePress Enter Message similar to the following is displayed Installing the remaining disk drivesVerifying that the system recognizes all disk drives Page Onstat -d egrep PDX pg One of the following occurs Checking the status of the disksMetadb Metastat grep State grep -v Okay pgActivating customer options CvueactivateTail -f /var/log/cvuelog Activating customer options Page Activating customer options Enter cd /adminsave/init.d Adminsave/init.d.completedEnter cd /cdrom/cdrom0 Script name Description How to recover Removing temporary ACD Verifying that CMS is operating Turning on CMSCat /var/log/cvuelog grep merged manually pg Checking manual merge discrepanciesChecking Free Space Allocation Updating the switch setup Turning on Visual Vectors server optionalAom start Setting the Informix configuration parameters Removing the upgrade filesCvuecleanup Cvuecleanup process is complete...Wed Aug 23 135600 MDT Migrating customer data Migrating system administration dataPg /cms/migrate/r3mig.log Field Value to enter or option to selectMigrating agent and call center administration data Agent/Call Center Admin data Vi /etc/default/login Resetting the Console parameterTurning the upgraded system over to the customer Replacing the customer’s tapesOnstat -d egrep PDX pg