Sharp SRT-8960, SRT-8168, SRT-8040 instruction manual Special Playback

Page 36

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

SPECIAL PLAYBACK

Picture Search (Forward and Reverse)

1Turn the SHUTTLE ring clockwise (or counterclockwise), during normal playback. See “SHUTTLE Ring Operation”.

øThe image can be seen while the tape is advanced (or rewound) at high speed.

2To return to normal playback, release the SHUTTLE ring.

NOTES:

œDuring picture search, noise (horizontal bars) will appear in the picture.

œThe sound is muted.

Still Image

1Press the STILL/PAUSE button, during normal playback.

øA still image can be viewed.

2To return to normal playback, press the PLAY button.

NOTES:

œIf still mode continues for 5 minutes or more, the VCR will go into stop mode to avoid damaging the tape.

œIf the image is unstable (rolling vertically), adjust the vertical lock control to correct.

œThe sound is muted.

Field Advance (Forward and Reverse)

1Turn the JOG dial clockwise (or counterclockwise), during still image mode.

øThe still image is advanced (or rewound) of one image (field).

øTurn the dial faster to increase the speed of the field advance.

2To return to normal playback, press the PLAY button.

NOTES:

œDuring reverse field advance, noise will appear in the picture.

œIf field advance mode continues for 5 minutes or more, the VCR will switch to stop mode to avoid damaging the tape.

œThe sound is muted.

Reverse Playback

1Turn the SHUTTLE ring counterclockwise and hold it, during normal playback. See “SHUTTLE Ring Operation”.

øReverse playback will start.

2To return to normal playback, release the SHUTTLE ring.

NOTES:

œDuring reverse playback, noise will appear in the picture.

œIf operated from normal playback mode, reverse playback is only possible during 8-hour playback speed mode.

œThe sound is muted.

Slow motion (Forward and Reverse)

1Turn the SHUTTLE ring clockwise (or counterclockwise) and hold it, during still image mode.

See “SHUTTLE Ring Operation”.

øForward (or reverse) slow motion playback will start.

2To return to normal playback, press the PLAY button.

NOTES:

œIf slow motion mode continues for 5 minutes or more, the VCR will switch to stop mode to avoid damaging the tape.

œThe sound is muted.

English

35

Image 36

Contents SRT-8960 SRT-8168 SRT-8040 Precautions For customers in CanadaPrecautions Moisture Condensation ProblemsLocation Avoiding Electrical Shock and FireContents FeaturesAccessory Locations of Controls and Indicators Front PanelLocations of Controls and Indicators Operation IndicatorsOperation Mode Indicator Digital DisplayWith the RS-485/232C interface board Back Panel With the RS-485/232C interface board B C DPower Cord Installation ConnectionsUsing the JOG dial and Shuttle ring for settings ON-SCREEN MenuMain Menu Sub-menusON-SCREEN Menu Setting the Language and Clock Language SettingClock setting Setting the Language and Clock Automatic Daylight Saving Time AdjustmentFactory setting Superimpose Display Selecting the Superimpose DisplayChanging the Superimpose Display Position Video Cassette Tapes Setting the Action to Take When a Cassette is Loaded Setting the Type of Tape UsedVideo Cassette Tapes Correct tape thread check functionTape Management OperationIf no tape management data is present on the tape If tape management data is present on the tapeSetting the Tape Management Function Tape ManagementTape Management menu appears Tape Management Conflict Display Conflict display sampleRecording Speed Mode Normal RecordingNormal Recording Before startingPause/still indicator N flashes Normal RecordingRecord Pause Recording CheckSetting the clog detection Action to Take when the Video Signal DeterioratesClog Detection Setting the Mode at the End of the Tape Setting the video input signalSetting when not using Autorepeat recording Setting when using Autorepeat recordingRepeat indicator lights Autorepeat RecordingAutorepeat Recording Alarm Recording Alarm Recording SettingALARM/SERIES REC SET menu appears Alarm Recording Alarm Recording Reset FunctionAlarm Recording Counter Display Connections to the Alarm in TerminalAlarm Search Alarm ScanProgram Timer Recording Program Timer Recording Timer SET menu appearsSetting the Holidays Changing a Program Timer RecordingTo Cancel a Program Timer Recording To cancel all program timer recordingsThese portions will not be recorded Recording Using AN External Timer Input Series Recording Setup Series RecordingOperation Loop recordingSingle Image Recording Setup Single Image RecordingNormal Playback Special Playback Special Playback Shuttle Ring OperationDAY/TIME Search Tape CounterDay/Time Search Setting the 4 digit security lock Cancel the 4 digit security lockSecurity Lock Quick Method Security LockClock Adjustment Selecting Input and Output TerminalsConnection Setting the Cassette Eject Mode Cassette Eject SetupEject output Timer OUT terminal Eject input Series in terminalOperator Mode Synchronization ControlSetting the Cassette Eject Mode Administrator/Installer ModeSynchronization Control SC will flash on the digital displaySetting for RS-485 or RS-232C USE Setting the Address and Data Transfer SpeedSettings when using RS-485 Power FAILURE/DEW/USED Time menu appears Timer OUT terminal Tape END OUT Terminal Output SettingOutput Terminals Tape END OUT TerminalSW OUT Terminal Output Setting Output TerminalsSW OUT Terminal ALARM@@@@@@@@@@@@Y NON@REC@@@@@@@@@@N Remote control setting Remote JackMaintenance Maintenance Maintenance TableMaintaining and Checking The Mechanism Troubleshooting Guide After a Power FailureSystem Down Specifications General SpecificationsConnectors VideoSpecifications Other SpecificationsConnectors When the Terminal SET is set to SET2 Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific Time