Sharp SRT-8168, SRT-8960 Clock Adjustment, Selecting Input and Output Terminals, Connection

Page 40

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

CLOCK ADJUSTMENT

The time for the second and subsequent VCRs can be set to the same time as the first VCR.

A signal from a separate device can also be used to set the time for the second and subsequent VCRs to the same time as the first VCR. When using the signal from a separate device to set the time, input a 0 V signal to the CONTROL IN terminal of the first VCR for 100 ms or longer.

1Press the MENU button to display the MAIN MENU.

2Turn the JOG dial to select the “3.GENERAL SET” line, then turn the SHUTTLE ring clockwise.

3Turn the JOG dial until the “CLOCK ADJUST” setting is highlighted, then turn the SHUTTLE ring clockwise.

4Turn the JOG dial to set the hour at which the adjustment will be conducted, then turn the SHUTTLE ring clockwise.

Example

<GENERAL@SET>

TAPE@IN@MODE@@@@@STOP

TAPE@END@MODE@@@@REW

CLOCK@ADJUST@@@@@03:00

THREAD@CHECK@@@@@N

VIDEO@LOSS@@@@@@@N

CLOG@DETECT.@@@@@N

REMOTE@@@@@@@@@@@MENU

VIDEO@@@@@@@@@@@@COLOR

VERTICAL@SYNC@@@@Y TAPE@@@@@@@@@@@@@T-160

5Press the MENU EXIT button.

The setting procedure on the first VCR is now completed.

6Repeat the procedure for all the other VCRs, setting “CLOCK ADJUST” (to the same time as set on the first VCR).

NOTE:

œThis function will not operate on the day the daylight saving/standard time is changed.

NOTE:

œ The clock adjustment cannot be set to “00:00”.

Connection

 

 

VCR No. 1

VCR No. 2

 

CONTROL IN COM CONTROL OUT

CONTROL IN COM CONTROL OUT

To CONTROL IN terminal

To COM terminal

SELECTING INPUT AND OUTPUT TERMINALS

The input and output terminal signals can be selected so that the VCR can be connected to older models of VCR.

1Press the MENU button to display the MAIN MENU.

2Turn the JOG dial to select the “9. OTHERS” line, then turn the SHUTTLE ring clockwise.

øThe (OTHERS) menu appears.

<OTHERS>

*ALARM@LOG

*POWER@FAILURE/DEW

*TERMINAL@SET@@@@SET1

3Turn the JOG dial until the “TERMINAL SET” setting is highlighted, then turn the SHUTTLE ring clockwise.

4Turn the JOG dial to select the desired mode, then turn the SHUTTLE ring clockwise.

SET1 . . . . . . . . . . . . . . According to indication on back panel. (Select when not connecting to an older model.)

SET2 . . . . . . . . . . . . . . CONTROL IN is set to CLOCK IN, SERIES IN is set to EJECT IN, CONTROL OUT is set to CLOCK OUT and TIMER OUT is set to EJECT OUT. (Select when connecting to an older model.)

5When finished, press the MENU EXIT button.

NOTE:

œIf set to “SET2”, the “SERIES REC” line will not appear in the (ALARM/SERIES REC SET) menu.

English

39

Page 39 Page 41
Image 40
Page 39 Page 41
Contents SRT-8960 SRT-8168 SRT-8040 Precautions For customers in CanadaPrecautions Moisture Condensation ProblemsLocation Avoiding Electrical Shock and FireFeatures ContentsAccessory Locations of Controls and Indicators Front PanelLocations of Controls and Indicators Operation IndicatorsOperation Mode Indicator Digital DisplayWith the RS-485/232C interface board Back Panel With the RS-485/232C interface board B C DPower Cord Installation ConnectionsUsing the JOG dial and Shuttle ring for settings ON-SCREEN MenuMain Menu Sub-menusON-SCREEN Menu Language Setting Setting the Language and ClockClock setting Automatic Daylight Saving Time Adjustment Setting the Language and ClockFactory setting Selecting the Superimpose Display Superimpose DisplayChanging the Superimpose Display Position Video Cassette Tapes Setting the Action to Take When a Cassette is Loaded Setting the Type of Tape UsedVideo Cassette Tapes Correct tape thread check functionTape Management OperationIf no tape management data is present on the tape If tape management data is present on the tapeTape Management Setting the Tape Management FunctionTape Management menu appears Tape Management Conflict Display Conflict display sampleRecording Speed Mode Normal RecordingNormal Recording Before startingPause/still indicator N flashes Normal RecordingRecord Pause Recording CheckAction to Take when the Video Signal Deteriorates Setting the clog detectionClog Detection Setting the Mode at the End of the Tape Setting the video input signalSetting when not using Autorepeat recording Setting when using Autorepeat recordingAutorepeat Recording Repeat indicator lightsAutorepeat Recording Alarm Recording Setting Alarm RecordingALARM/SERIES REC SET menu appears Alarm Recording Alarm Recording Reset FunctionAlarm Recording Counter Display Connections to the Alarm in TerminalAlarm Search Alarm ScanProgram Timer Recording Program Timer Recording Timer SET menu appearsSetting the Holidays Changing a Program Timer RecordingTo Cancel a Program Timer Recording To cancel all program timer recordingsThese portions will not be recorded Recording Using AN External Timer Input Series Recording Setup Series RecordingOperation Loop recordingSingle Image Recording Setup Single Image RecordingNormal Playback Special Playback Special Playback Shuttle Ring OperationTape Counter DAY/TIME SearchDay/Time Search Setting the 4 digit security lock Cancel the 4 digit security lockSecurity Lock Quick Method Security LockSelecting Input and Output Terminals Clock AdjustmentConnection Setting the Cassette Eject Mode Cassette Eject SetupEject output Timer OUT terminal Eject input Series in terminalOperator Mode Synchronization ControlSetting the Cassette Eject Mode Administrator/Installer ModeSynchronization Control SC will flash on the digital displaySetting the Address and Data Transfer Speed Setting for RS-485 or RS-232C USESettings when using RS-485 Power FAILURE/DEW/USED Time menu appears Timer OUT terminal Tape END OUT Terminal Output SettingOutput Terminals Tape END OUT TerminalOutput Terminals SW OUT Terminal Output SettingSW OUT Terminal ALARM@@@@@@@@@@@@Y NON@REC@@@@@@@@@@N Remote control setting Remote JackMaintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Specifications General SpecificationsConnectors VideoOther Specifications SpecificationsConnectors When the Terminal SET is set to SET2 Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific Time
Top Page Image Contents