Sharp SRT-8168, SRT-8960, SRT-8040 instruction manual With the RS-485/232C interface board

Page 7

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

LOCATIONS OF CONTROLS AND INDICATORS

[With the RS-485/232C interface board]

œ Display when set to RS-485

œ Display when set to RS-232C

œ Data transfer speed setting display

œ Address setting display (RS-485 only)

3, 6Mode display

œ Day/Time search

setting display

5 Power failure indicator

Lights after a power failure.

NOTE:

œTo cancel the “P” display, press the MENU RESET button.

8Counter memory indicator

Lights when the counter memory function is being used.

9Timer Recording indicator

Lights when in timer recording stand-by mode, or during a timer recording.

FSecurity lock indicator

Lights when the security lock is engaged.

GExternal input indicator

Lights when recording using the EXT TIMER IN input terminal.

6

7

Counter display

œ Time display (No tape)

œ Linear time counter display (Tape inserted)

HM S

OFF indicator

Lights when the tape end has been reached after recording.

6

English

Image 7
Contents SRT-8960 SRT-8168 SRT-8040 For customers in Canada PrecautionsAvoiding Electrical Shock and Fire PrecautionsMoisture Condensation Problems LocationFeatures ContentsAccessory Front Panel Locations of Controls and IndicatorsDigital Display Locations of Controls and IndicatorsOperation Indicators Operation Mode IndicatorWith the RS-485/232C interface board B C D Back Panel With the RS-485/232C interface boardConnections Power Cord InstallationSub-menus Using the JOG dial and Shuttle ring for settingsON-SCREEN Menu Main MenuON-SCREEN Menu Language Setting Setting the Language and ClockClock setting Automatic Daylight Saving Time Adjustment Setting the Language and ClockFactory setting Selecting the Superimpose Display Superimpose DisplayChanging the Superimpose Display Position Video Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedSetting the Type of Tape Used Video Cassette TapesIf tape management data is present on the tape Tape ManagementOperation If no tape management data is present on the tapeTape Management Setting the Tape Management FunctionTape Management menu appears Conflict display sample Tape Management Conflict DisplayBefore starting Recording Speed ModeNormal Recording Normal RecordingRecording Check Pause/still indicator N flashesNormal Recording Record PauseAction to Take when the Video Signal Deteriorates Setting the clog detectionClog Detection Setting when using Autorepeat recording Setting the Mode at the End of the TapeSetting the video input signal Setting when not using Autorepeat recordingAutorepeat Recording Repeat indicator lightsAutorepeat Recording Alarm Recording Setting Alarm RecordingALARM/SERIES REC SET menu appears Connections to the Alarm in Terminal Alarm RecordingAlarm Recording Reset Function Alarm Recording Counter DisplayAlarm Scan Alarm SearchProgram Timer Recording Timer SET menu appears Program Timer RecordingTo cancel all program timer recordings Setting the HolidaysChanging a Program Timer Recording To Cancel a Program Timer RecordingThese portions will not be recorded Recording Using AN External Timer Input Loop recording Series Recording SetupSeries Recording OperationSingle Image Recording Single Image Recording SetupNormal Playback Special Playback Shuttle Ring Operation Special PlaybackTape Counter DAY/TIME SearchDay/Time Search Quick Method Security Lock Setting the 4 digit security lockCancel the 4 digit security lock Security LockSelecting Input and Output Terminals Clock AdjustmentConnection Eject input Series in terminal Setting the Cassette Eject ModeCassette Eject Setup Eject output Timer OUT terminalSynchronization Control Operator ModeSC will flash on the digital display Setting the Cassette Eject ModeAdministrator/Installer Mode Synchronization ControlSetting the Address and Data Transfer Speed Setting for RS-485 or RS-232C USESettings when using RS-485 Power FAILURE/DEW/USED Time menu appears Tape END OUT Terminal Timer OUT terminalTape END OUT Terminal Output Setting Output TerminalsOutput Terminals SW OUT Terminal Output SettingSW OUT Terminal ALARM@@@@@@@@@@@@Y NON@REC@@@@@@@@@@N Remote Jack Remote control settingMaintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Video SpecificationsGeneral Specifications ConnectorsOther Specifications SpecificationsConnectors When the Terminal SET is set to SET2 Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR Warranty