Sharp SRT-8960, SRT-8168, SRT-8040 instruction manual Power FAILURE/DEW/USED Time menu appears

Page 45

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

CHECKING POWER FAILURE, FAILURE DUE TO CONDENSATION AND USAGE DURATION

1Press the MENU button to display the MAIN MENU.

2Turn the JOG dial to select the “9.OTHERS” line, then turn the SHUTTLE ring clockwise.

øThe (OTHERS) menu appears.

<OTHERS>

*ALARM@LOG

*POWER@FAILURE/DEW

*TERMINAL@SET@@@@SET1

3Turn the JOG dial to select the “POWER FAILURE/DEW” line, then turn the SHUTTLE ring clockwise.

øThe (POWER FAILURE/DEW/USED TIME) menu appears.

Example

<POWER@FAILURE> 001@FAILURE@@12-25@07:15

@@@@RECOVERY@12-25@07:30

<DEW> 001@FAILURE@@12-25@11:00

@@@@RECOVERY@12-25@12:00

<USED@TIME>

@@VIDEO@@@@@@@@@00003H

@@POWER@@@@@@@@@00007H

POWER FAILURE . . . . The number of power failures, and the date and time of the most recent power failure and recovery are displayed.

DEW. . . . . . . . . . . . . . . The number of failures due to condensation, and the date and time of the most recent failure and recovery are displayed.

USED TIME . . . . . . . . . The video heads usage duration and the power on duration are displayed.

4Press the MENU EXIT button.

NOTE:

œIf the MENU RESET button is pressed while the “POWER FAILURE” and “DEW” data is displayed, the data is erased. The “USED TIME” data cannot be reset. “P” will be erased from the digital display.

44

English

Image 45

Contents SRT-8960 SRT-8168 SRT-8040 For customers in Canada PrecautionsMoisture Condensation Problems PrecautionsLocation Avoiding Electrical Shock and FireContents FeaturesAccessory Front Panel Locations of Controls and IndicatorsOperation Indicators Locations of Controls and IndicatorsOperation Mode Indicator Digital DisplayWith the RS-485/232C interface board B C D Back Panel With the RS-485/232C interface boardConnections Power Cord InstallationON-SCREEN Menu Using the JOG dial and Shuttle ring for settingsMain Menu Sub-menusON-SCREEN Menu Setting the Language and Clock Language SettingClock setting Setting the Language and Clock Automatic Daylight Saving Time AdjustmentFactory setting Superimpose Display Selecting the Superimpose DisplayChanging the Superimpose Display Position Video Cassette Tapes Setting the Type of Tape Used Setting the Action to Take When a Cassette is LoadedVideo Cassette Tapes Correct tape thread check functionOperation Tape ManagementIf no tape management data is present on the tape If tape management data is present on the tapeSetting the Tape Management Function Tape ManagementTape Management menu appears Conflict display sample Tape Management Conflict DisplayNormal Recording Recording Speed ModeNormal Recording Before startingNormal Recording Pause/still indicator N flashesRecord Pause Recording CheckSetting the clog detection Action to Take when the Video Signal DeterioratesClog Detection Setting the video input signal Setting the Mode at the End of the TapeSetting when not using Autorepeat recording Setting when using Autorepeat recordingRepeat indicator lights Autorepeat RecordingAutorepeat Recording Alarm Recording Alarm Recording SettingALARM/SERIES REC SET menu appears Alarm Recording Reset Function Alarm RecordingAlarm Recording Counter Display Connections to the Alarm in TerminalAlarm Scan Alarm SearchProgram Timer Recording Timer SET menu appears Program Timer RecordingChanging a Program Timer Recording Setting the HolidaysTo Cancel a Program Timer Recording To cancel all program timer recordingsThese portions will not be recorded Recording Using AN External Timer Input Series Recording Series Recording SetupOperation Loop recordingSingle Image Recording Single Image Recording SetupNormal Playback Special Playback Shuttle Ring Operation Special PlaybackDAY/TIME Search Tape CounterDay/Time Search Cancel the 4 digit security lock Setting the 4 digit security lockSecurity Lock Quick Method Security LockClock Adjustment Selecting Input and Output TerminalsConnection Cassette Eject Setup Setting the Cassette Eject ModeEject output Timer OUT terminal Eject input Series in terminalSynchronization Control Operator ModeAdministrator/Installer Mode Setting the Cassette Eject ModeSynchronization Control SC will flash on the digital displaySetting for RS-485 or RS-232C USE Setting the Address and Data Transfer SpeedSettings when using RS-485 Power FAILURE/DEW/USED Time menu appears Tape END OUT Terminal Output Setting Timer OUT terminalOutput Terminals Tape END OUT TerminalSW OUT Terminal Output Setting Output TerminalsSW OUT Terminal ALARM@@@@@@@@@@@@Y NON@REC@@@@@@@@@@N Remote Jack Remote control settingMaintenance Maintenance Maintenance TableMaintaining and Checking The Mechanism Troubleshooting Guide After a Power FailureSystem Down General Specifications SpecificationsConnectors VideoSpecifications Other SpecificationsConnectors When the Terminal SET is set to SET2 Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR Warranty