Sharp SRT-8960, SRT-8168, SRT-8040 instruction manual Alarm Search, Alarm Scan

Page 27

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

ALARM RECORDING

Alarm Search

To go to the beginning of a desired alarm recording.

1Press the SEARCH button during stop mode.

ø“AL SEARCH 01” appears on screen.

2Press the REC/PLAY SPEED l (or j) button to set the desired alarm number (01 to 99), then turn the SHUTTLE ring clockwise (or counterclockwise).

øThe desired alarm is searched for and a still image of the beginning of the alarm recording appears on-screen.

NOTE:

œThe alarm number is relative to the actual tape position. (Please refer to the illustration below.)

						Playback

		Alarm number 2				1			1	2
	Alarm		input point
		trigger
		trigger
			Rewind direction						Fast-forward direction

						Actual position
						Actual position

3Press the PLAY button.

øPlayback starts.

NOTES:

œIf the end of the tape is reached during a search, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.

œThis function does not operate when a warning display appears on the digital display.

Alarm Scan

To look for an alarm recording by viewing the first 5 seconds of each alarm recording.

1Press the SEARCH button twice during stop mode.

ø“AL SCAN” will be displayed on screen.

2Turn the SHUTTLE ring clockwise (or counterclockwise).

øThe unit will advance (or rewind) the tape at high speed and playback the first 5 seconds of every alarm recording.

øTo cancel the alarm scan mode, press the STOP button.

3While the desired recording is being played back, press the PLAY button.

øPlayback starts and alarm scan mode is canceled.

NOTES:

œIf the end of the tape is reached during a scan, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.

œThis function does not operate when a warning display appears on the digital display.

26

English

Image 27

Contents SRT-8960 SRT-8168 SRT-8040 For customers in Canada PrecautionsAvoiding Electrical Shock and Fire PrecautionsMoisture Condensation Problems LocationContents FeaturesAccessory Front Panel Locations of Controls and IndicatorsDigital Display Locations of Controls and IndicatorsOperation Indicators Operation Mode IndicatorWith the RS-485/232C interface board B C D Back Panel With the RS-485/232C interface boardConnections Power Cord InstallationSub-menus Using the JOG dial and Shuttle ring for settingsON-SCREEN Menu Main MenuON-SCREEN Menu Setting the Language and Clock Language SettingClock setting Setting the Language and Clock Automatic Daylight Saving Time AdjustmentFactory setting Superimpose Display Selecting the Superimpose DisplayChanging the Superimpose Display Position Video Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedSetting the Type of Tape Used Video Cassette TapesIf tape management data is present on the tape Tape ManagementOperation If no tape management data is present on the tapeSetting the Tape Management Function Tape ManagementTape Management menu appears Conflict display sample Tape Management Conflict DisplayBefore starting Recording Speed ModeNormal Recording Normal RecordingRecording Check Pause/still indicator N flashesNormal Recording Record PauseSetting the clog detection Action to Take when the Video Signal DeterioratesClog Detection Setting when using Autorepeat recording Setting the Mode at the End of the TapeSetting the video input signal Setting when not using Autorepeat recordingRepeat indicator lights Autorepeat RecordingAutorepeat Recording Alarm Recording Alarm Recording SettingALARM/SERIES REC SET menu appears Connections to the Alarm in Terminal Alarm RecordingAlarm Recording Reset Function Alarm Recording Counter DisplayAlarm Scan Alarm SearchProgram Timer Recording Timer SET menu appears Program Timer RecordingTo cancel all program timer recordings Setting the HolidaysChanging a Program Timer Recording To Cancel a Program Timer RecordingThese portions will not be recorded Recording Using AN External Timer Input Loop recording Series Recording SetupSeries Recording OperationSingle Image Recording Single Image Recording SetupNormal Playback Special Playback Shuttle Ring Operation Special PlaybackDAY/TIME Search Tape CounterDay/Time Search Quick Method Security Lock Setting the 4 digit security lockCancel the 4 digit security lock Security LockClock Adjustment Selecting Input and Output TerminalsConnection Eject input Series in terminal Setting the Cassette Eject ModeCassette Eject Setup Eject output Timer OUT terminalSynchronization Control Operator ModeSC will flash on the digital display Setting the Cassette Eject ModeAdministrator/Installer Mode Synchronization ControlSetting for RS-485 or RS-232C USE Setting the Address and Data Transfer SpeedSettings when using RS-485 Power FAILURE/DEW/USED Time menu appears Tape END OUT Terminal Timer OUT terminalTape END OUT Terminal Output Setting Output TerminalsSW OUT Terminal Output Setting Output TerminalsSW OUT Terminal ALARM@@@@@@@@@@@@Y NON@REC@@@@@@@@@@N Remote Jack Remote control settingMaintenance Maintenance Maintenance TableMaintaining and Checking The Mechanism Troubleshooting Guide After a Power FailureSystem Down Video SpecificationsGeneral Specifications ConnectorsSpecifications Other SpecificationsConnectors When the Terminal SET is set to SET2 Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR Warranty