RANDOM /REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT while pressing SHIFT .
Each time it is pressed, the function can be selected cyclically. RANDOM play — RANDOM lights up on the display. REPEAT play — " lights up on the display. RANDOM/REPEAT play — RANDOM and "light up on the display.
Cancel — RANDOM and " disappear from the display.
To play all discs, press d to start play.
To play a single disc, press one of DISC DIRECT PLAY
During random play it is not possible to skip to the previously played track with f.
BLANK SKIP PLAY
The silent portions between tracks recorded on a CD can be skipped during playback.
1Press CD BLANK SKIP.
“CD BLANK SKIP ON” is displayed and “ ” appears in the display.
2Press d to start playback.
The silent portions between tracks will be skipped, and the sound will be played back without interruption. If a track fades out (ends with the sound gradually decreasing), the fadeout portion also will be skipped.
To return to normal playback
Press CD BLANK SKIP again, and “CD BLANK SKIP OFF” is
displayed and “ ” in the display disappears.
•There may be a case where BLANK SKIP PLAY does not function correctly.
•BLANK SKIP PLAY is automatically canceled when performing AI EDIT RECORDING (page 19), PROGRAMMED EDIT RECORDING (page 20), or recording during PROGRAMMED PLAY (below) or RANDOM PLAY (above).
16 ENGLISH
PROGRAMMED PLAY
Up to 30 tracks can be programmed from any of the inserted discs.
Use the remote control.
1Press PRGM twice while pressing SHIFT in stop
mode.
“PRGM” is displayed . | PRGM | ||
|
|
|
|
|
|
|
|
|
|
|
|
•When PRGM is pressed once in step 1, the unit enters the KARAOKE PROGRAM (page 22).
2Press DISC DIRECT PLAY
Go to the next step when the tray stops rotating.
3Press numbered buttons 0-9 and +10 to program
a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
Selected track number | Total number of selected tracks | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Program number Total playing time of the selected tracks
4Repeat steps 2 and 3 to program other tracks.
5Press d to start play.
To check the program
Each time f or g is pressed in stop mode, a disc number, track number, and program number will be displayed.
To clear the program
Press s CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT repeatedly while pressing SHIFT until "appears on the display.
•During programmed play, you cannot perform random play, check the remaining time, and select a disc or track. “Can’t USE” is displayed if you attempt to select a track.
•“FULL” is displayed if you attempt to program more than 30 tracks.