MUSIC SENSOR
If there is a
Press for gduring playback referring to the playback side indicator (x or c) on the display.
For example, when gis pressed while cis displayed, playback of the next track starts.
Music sensor function may not be able to detect tracks under the following conditions:
•Blanks of less than 4 seconds between tracks
•Noisy blanks
•Long passages of
•Low overall recording levels
CONTINUOUS PLAY
After playback on one deck finishes, the tape in the other deck will start to play without interruption.
1Insert tapes into deck 1 and deck 2.
2Press TAPE/DECK1/2 to select the deck to be played back first.
3Press REV MODE to select [.
4Press d to start playback.
Playback continues until s is pressed.
About cassette tapes
•To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.
Side A
Type II tape | Tab for side A |
detection |
|
slot |
|
To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.)
•
•Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.