Sony NSX-AJ80 manual Precautions, Installation, Electric Power

Page 2

ENGLISH

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

“CAUTION:TO REDUCE THE RISK OF

ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.”

Explanation of Graphical Symbols:

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right or authority to operate this product.

PRECAUTIONS

Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on the unit should be strictly followed, as well as the safety suggestions below.

Installation

1Water and moisture — Do not use this unit near water, such as near a bathtub, washbowl, swimming pool, or the like.

2Heat — Do not use this unit near sources of heat, including heating vents, stoves, or other appliances that generate heat. It also should not be placed in temperatures less than 5°C (41°F) or greater than 35°C (95°F).

3Mounting surface — Place the unit on a flat, even surface.

4Ventilation — The unit should be situated with adequate space around it so that proper heat ventilation is assured. Allow 10 cm (4 in.) clearance from the rear and the top of the unit, and 5 cm (2 in.) from each side.

-Do not place the unit on a bed, rug, or similar surface that may block the ventilation openings.

-Do not install the unit in a bookcase, cabinet, or airtight rack where ventilation may be impeded.

5Objects and liquid entry — Take care that objects or liquids do not get inside the unit through the ventilation openings.

6Carts and stands — When placed

or mounted on a stand or cart, the unit should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit or cart to overturn or fall.

7Condensation — Moisture may form on the CD pickup lens when:

-The unit is moved from a cold spot to a warm spot

-The heating system has just been turned on

-The unit is used in a very humid room

-The unit is cooled by an air conditioner

When this unit has condensation inside, it may not function normally. Should this occur, leave the unit for a few hours, then try to operate again.

8Wall or ceiling mounting — The unit should not be mounted on a wall or ceiling, unless specified in the Operating Instructions.

Electric Power

1Power sources — Connect this unit only to power sources specified in the Operating Instructions, and as marked on the unit.

2Polarization — As a safety feature, some units are equipped with polarized AC power plugs which can only be inserted one way into a power outlet. If it is difficult or impossible to insert the AC power plug into an outlet, turn the plug over and try again. If it still does not easily insert into the outlet, please call a qualified service technician to service or replace the outlet. To avoid defeating the safety feature of the polarized plug, do not force it into a power outlet.

3AC power cord

-When disconnecting the AC power cord, pull it out by the AC power plug. Do not pull the cord itself.

-Never handle the AC power plug with wet hands, as this could result in fire or shock.

-Power cords should be firmly secured to avoid being severely bent, pinched, or walked upon. Pay particular attention to the cord from the unit to the power outlet.

-Avoid overloading AC outlets and extension cords beyond their capacity, as this could result in fire or shock.

2 ENGLISH

Image 2
Contents NSX-AJ80 Electric Power PrecautionsInstallation Table of Contents 1Connect the right speaker to the main unit Before connecting the AC cordConnections Positioning the Speakers3Connect the satellite speakers to the main unit Connecting AN Outdoor Antenna2Connect the left speaker to the main unit 4Connect the supplied antennasBefore Operation Remote ControlSetting Power Economizing Mode Flash Window Setting the ClockDimmer Mode Press ClockSelecting the Programmed Equalization Curve Audio Adjustments Graphic EqualizerVolume BBE SystemPress GEQ, followed by Enter within 4 seconds Setting a NEW Equalization Curve ManuallyStoring the NEW Equalization Curves Within 8 seconds, press EnterPress Satellite to activate the 3-Amp Panorama Sound System Selecting a Programmed DSP Surround ModeDSP Surround Channel Multi-Amplifier System Preset Number Tuning Manual TuningPresetting Stations Basic Operations Press d to start playAbout cassette tapes Continuous PlayMusic Sensor Playback Loading DiscsPlaying Discs Blank Skip Play Programmed PlayRandom /REPEAT Play Recording CD Playing Basic RecordingInserting Blank Spaces Press Sync DUB once or twice to start recording Dubbing a Tape ManuallyPress TAPE/DECK 1/2 to select deck To stop dubbingPress CD and load the discs Press CD EDIT/CHECK once AI Edit RecordingInsert the tape into deck Press w REC/REC Mute to start recording onPress wREC/REC Mute to start recording Press CD and load the discs Press CD EDIT/CHECK twiceRepeat for the rest of the tracks for side To change the program of each sideKaraoke Recording Microphone MixingVocal FADER/MULTIPLEX Functions Karaoke Program Repeat to reserve other tracks Press d to start playTo check the time remaining until the power is turned off Setting the Sleep TimerTimer Karaoke To cancel the sleep timerPress Power to turn off the power Timer RecordingAdjust the volume Prepare the sourcePress s twice to stop the remaining two numbers Other Features TimerPress s once Line OUT Jacks VIDEO/AUX JacksMD Jacks CD Digital OUT Optical JackGeneral Other Connections Care and MaintenanceTroubleshooting Guide Specifications CopyrightParts Index Instalación PrecaucionesAdvertencia Energía eléctricaIndice Antes de conectar el cable de CA Conexiones1Conecte el altavoz derecho a la unidad principal Importante3Conecte los altavoces auxiliares a la unidad principal Conexion DE UNA Antena Exterior2Conecte el altavoz izquierdo a la unidad principal 4Conecte las antenas suministradasActivacion DEL Modo DE Ahorro DE Energía Control RemotoAntes DE LA Operacion Modo DE Intensidad DE Iluminacion Ventanilla ParpadeanteAjustes DE Audio Ecualizador Grafico Ecualizacion Nuevas Ajuste Manual DE UNA Curva DE Ecualizacion NuevaAlmacenamiento DE Curvas DE Pulse GEQ, seguido de Enter antes de que Pasen 4 segundosPara visualizar el modo DSP Surround actual Tres AmplificadoresSeleccion DE UN Modo DSP Surround Programado Cuando la fuente musical sea monoSistema multiamplificador de 4 canales PianoSintonizacion Mediante Numero DE Preajuste Sintonizacion ManualPreajuste DE Emisoras Pulse fDOWN o gUP para seleccionar una EmisoraPulse d para iniciar la reproducción Operaciones BasicasPulseTAPE/DECK 1/2 y Push Eject zpara abrir el portacasete RadioladeAcerca de las cintas de casete Reproduccion ContinuaSensor Musical Cintasde Reproduccion Introduccion DE DiscosReproduccion DE Discos Compactosdiscos DereproduccionPulse CD Blank Skip Reproduccion ALEATORIA/ Repeticion DE ReproduccionReproduccion CON Salto DE Secciones EN Blanco Pulse Disc Direct Play 1-3 para seleccionar un DiscoDiscos Grabacion BasicaInsercion DE Espacios SIN Grabar Para detener el copiado Pulse TAPE/DECK 1/2 para seleccionar la platinaPulse una o dos veces Sync DUB para iniciar la grabación Pulse wREC/REC Mute para iniciar la grabación Grabacion CON Edicion AIInserte la cinta en la platina De la primera caraGrabacion CON Edicion Programada Para cambiar el programa de cada caraKaraoke Grabacion Mezcla MicrofonicaFunciones DE Desvanecimiento DE VOZ/MULTIPLEX Programa DE Karaoke Para cancelar el temporizador para dormir Por el temporizadorGrabacion CON Temporizador Ajuste el volumenPulse Power para desconectar la alimentación Prepare la fuentePulse una vez s Otras CaracteristicasOtras Caracteristicas Temporizador Pulse dos veces spara detener los dos números RestantesTomas Line OUT Tomas VIDEO/AUXTomas MD Toma CD Digital OUT OpticalSeccion DEL Sintonizador Generalidades Otras ConexionesGeneralidades Seccion DE LA PlatinaEspecificaciones Copyright Derechos DE AutorEnergie électrique Signification des symboles graphiquesAvertissement Cordon d’alimentation secteurTable DES Matieres Avant de brancher le cordon secteur Connexions1Connecter l’enceinte droite à l’appareil principal Positionnement des enceintes3Connecter les enceintes satellites à l’appareil principal Connexion D’UNE Antenne Exterieure2Connecter l’enceinte gauche à l’appareil principal 4Connecter les antennes fourniesTelecommande Avant L’UTILISATIONFenetre Clignotante Mode VariateurReglage DE L’HORLOGE Systeme BBE Reglages AudioEgaliseur Graphique Systeme Super T-BASSHigh Reglage Manuel D’UNE Nouvelle Courbe D’EGALISATIONMemorisation DES Nouvelles Courbes D’EGALISATION Dans les huit secondes, appuyer sur EnterSurround DSP Selection D’UN Mode Surround DSP ProgrammePour afficher le mode Surround DSP courant Trois AmplificateursSystème multi-amplificateur à quatre canaux Accord PAR Numero DE Prereglage Accord ManuelMemorisation DE Stations Appuyer sur f Down ou g UP pour sélectionner une stationCassettesde Operations DE BaseAppuyer sur d pour démarrer la lecture Au sujet des cassettes Lecture ContinueSenseur DE Musique Cassettes Mise EN Place DE DisquesLecture DE Disques Lecture Avec Saut DES Blancs Lecture ProgrammeeLecture ALEATOIRE/REPETEE Appuyer sur CD Blank SkipCompacts Enregistrement DE BaseInsertion D’ESPACES Blancs Appuyer sur TAPE/DECK 1/2 pour sélectionner La platine Pour arrêter la duplicationInsérer la cassette dans la platine Appuyer sur w REC/REC Mute pour démarrer’enregistrement sur la première face Pour changer le programme de chaque face Répéter l’étape 5 pour le reste des plages de la Face aFace Karaoke Enregistrement Mixage Avec MicrophoneFonctions Vocal FADER/MULTIPLEX Répéter l’étape 3 pour réserver d’autres plages Programme DE KaraokeShift Minuterie Karaoke Pour annuler la minuterie d’arrêtAppuyer sur Power pour mettre l’appareil hors Tension Enregistrement Commande PAR MinuterieRégler le volume Préparer la sourcePour annuler le jeu Demo Appuyer une fois sur sCaracteristiques Pour réinitialiser le jeu DemoPrises Line OUT Prises VIDEO/AUXPrises MD Prise CD Digital OUT OpticalGeneralites Autres Connexions EN CAS DE ProblemeSoins ET Entretien Droits D’AUTEUR