Britax Child Seat manual Safety Information, Rear-Facing Installation, Forward-Facing Installation

Page 14

Aircraft Installation

This child seat is certified for aircraft use. Most airlines in Canada and the U.S. will allow use of a child seat as long as it is labeled as an approved child seat for airline use and fits properly on the aircraft seat. Contact the airline about their policy prior to traveling.

Install your child seat in a window seat to avoid blocking the aisle.

If the aircraft lap belt is too short, ask the flight attendant for a belt extender.

Rear-Facing Installation

For rear-facing aircraft installation (Fig. A),

follow Rear-FacingLap-Belt Installation A Rear-facinginstructions on pages 16 – 17.

Forward-Facing Installation

For forward-facing aircraft installation (Fig. B), follow Forward-FacingLap-Belt Installation instructions on pages 22 – 23.

b Forward-facing

Installation : Versa-Tether®

Safety Information

WARNING!

When using the child seat in forward-facing mode, attach the Versa- Tether only to tether anchors designated by the vehicle manufacturer as tether anchorage points. Use of other locations is not approved or permitted.

DO NOT modify the vehicle without advice from the vehicle manufacturer if a tether anchorage is not available.

IMPORTANT:

If your vehicle does not currently have a tether anchor attachment, refer to your vehicle owner’s manual or contact the vehicle manufacturer for assistance.

For vehicles manufactured January 1989 through August 2000 equipped with vehicle manufacturer designated tether anchorage locations consisting of a hole or threaded hole, tether anchorage hardware is available upon request – at no cost – by contacting Britax Consumer Services at 1-888-427-4829.

24

25

Image 14
Contents Roundabout Table of Contents Secure the top tether strap provided with this child seat Registration Important NotesCertification Forward-Facing Important Harness AdjustmentsInches When the top of the child’s ears are below the top Rear-FacingChild Seat Features Vehicle Buckle Positions Vehicle Safety BeltsSee diagram below Vehicle Seating PositionsIntended Lower Universal Anchorage System Luas InstallationIf stored, remove the LCS strap and connectors Vehicle belt can be routed over or under the cover Lap-Shoulder Belt InstallationPosition the lap belt portion through the open Lock-off is properly closed when a positive click is heard Lap-Belt InstallationHas and how to lock the retractor Car is parked on a level surface Fig. FLocations This child seat must not be used forwardWho weigh less than 9.1 kg 20 lbs Under the cover. See page 28. Pull both LCSAForward-facing Lap-Belt Installation Forward-Facing Installation Safety InformationRear-Facing Installation Using the Versa-Tether Tether Connector StrapStoring the LCS Connectors Switching the Lower Connector System LCSRecline Adjustment Chest ClipFastening the Harness Buckle How to Adjust Harness Slot HeightHarness Buckle Releasing the Harness BuckleChild Seat Functions Care and Maintenance Child Seat Cover RemovalHarness Buckle Removal Re-threading the Harness BuckleCleaning the Harness Buckle WarrantyInstallation sangle Versa-Tether Mise EN GARDE  Enregistrement Remarques importantesHomologation Face à lavant Important réglage du harnaisSiège orienté face à larrière Qui sont âgés dau moins un an etSous la housse Positions de la boucle de ceinture du Véhicule Voir le diagramme ci-dessousCeintures de sécurité du véhicule Positions assises du véhiculeInstallation avec système dancrage universel au bas Luas Installation avec ceinture à trois points dappui Lorsque les connecteurs Luas ne sont pas utilisés, toujoursDauto.sur une surface horizontale figure F.90º Installation avec ceinture sous-abdominaleSi nécessaire, on peut obtenir le bon angle dinclinaison f Coquille Remarque Si lon nentend pas un déclic positif mais que leEst faite correctement LarrièreJeu de la sangle dattache pour obtenir une fixation Face à lavant avec ceinture à trois points dappuiVerrouiller le rétracteur Mise EN Garde Consignes de sécurité Installation dans un avionInstallation du siège orienté face à lavant Repérez un point d’ancrage fixe qui soit Sangle de connexion dattacheUtilisation de la sangle Versa-Tether Sur la sangle dattacheRemarque Les sièges dauto sont livrés par Britax avec Interversion du système à connecteur bas LCSRangement des connecteurs LCS Boucle pour les retirer de la boucle figure B Boucle du harnaisTenir la boucle du harnais avec une main Dauto Retrait de la housse du siège dautoRetirerdoucementlapartiesupérieuredelahousse. f De poitrine par les fentes inférieures dans la housseNettoyer À Léponge avec de leau tiède et un savon doux Retrait de la boucle du harnaisPassage de la boucle du harnais Nettoyage de la boucle du harnais GarantieIMPORTANT