Fisher-Price M7933 manual Problems & Solutions, Problem Solution

G Problems & Solutions
Problem	Solution
You hear static or buzzing	Receiver is out of range of transmitter. Move receiver closer to transmitter.
	Note: Range varies depending on surrounding conditions such as noise
	levels, physical obstructions and signal interference.
	Transmitter power is off. Turn transmitter power on.
	Channel switches are on different channels. Make sure channel switches on
	both transmitter and receiver are set to same channel.
	Loose power cord connection and transmitter power is off. Check transmitter
	power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off. Make sure light switch
	that controls power fl ow to wall outlet is on.
	Power is off because circuit breaker for room is off. Make sure house fuses
	and circuit breakers are on.
Receiver power/low battery indicator	Receiver power is off. Turn receiver power on.
does not light
	Batteries in receiver are weak or dead. Replace all batteries with three,
	alkaline “AAA” (LR03) batteries or use AC adaptor as power source.
	Power is off because circuit breaker for room is off. Make sure house fuses
	and circuit breakers are on.
	No power to wall outlet and power is off. Make sure light switch that
	controls power fl ow to wall outlet is on.
Receiver power/low battery indicator	Batteries in receiver are weak or dead. Replace all batteries with three,
turns orange	alkaline “AAA” (LR03) batteries or use AC adaptor as power source.
Transmitter power indicator does	Transmitter power is off. Turn transmitter power on.
not light
	Loose power cord connection and transmitter power is off. Check transmitter
	power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off. Make sure light switch
	that controls power fl ow to wall outlet is on.
	Power is off because circuit breaker for baby’s room is off. Make sure house
	fuses and circuit breakers are on.
You can hear conversations or sounds	There is signal interference due to other nursery monitors on same channel
from other homes	or cordless telephone use. Change channel switches on both transmitter
	and receiver to eliminate source of interference.

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact Mattel.

21