Bushnell 11-0832 Binocular Instructions, Installing Batteries, Turning the Camera on and OFF

TAKE A PHOTO

• Holding the Imageview as steadily as possible with both hands, confirm that the image

appears sharp on the LCD display. (If not, you are probably too close. Unlike the binocular

optics, the camera focus is preset and is designed only for distant subjects that are 30 feet or

Congratulations on your purchase of a Bushnell ImageView binocular. Before using the product, please read these instructions and take time to familiarize yourelf with the different parts and features of the product.

more away from the camera). Lightly press the SNAP button to take the photo. The display will

let you review the photo for a few seconds after you take it. If the exposure or color is bad, try

adjusting the EV, Meter, and/or White Balance settings as described in the manual and reshoot.

REVIEWING AND DELETING PHOTOS

•Press the VIEW button to see a playback of your stored photos. Use the left/right arrow keys on the 5-way switch to step through the photos. To erase a photo from memory, pressing the MENU button four times in a row will delete it by: (1) Turning on the play menu, (2) Selecting DELETE, (3) Selecting DELETE ONE=OK, and (4) Confirming you wish to delete the photo.

DOWNLOADING PHOTOS TO YOUR COMPUTER

•If you are using Windows 98, be sure to install the driver first from the CD-ROM as directed in “Software Installation”. If you do not already have photo software you prefer to use, install Roxio® PhotoSuite 5 from the CD. Connect the supplied USB cable between the Imageview and your computer. Open Windows Explorer. Under “My Computer” the Imageview will appear as a new “Removable Disk”. Your photos are .jpg files inside the folders found in this “Disk”. Open the folders, then select and drag (or copy/paste) the photo files to a folder on your hard drive. You are then ready to open and work with the photos using PhotoSuite or the photo software of your choice, and may then delete the old photos from the Imageview memory. After you finish downloading, right click on the “Removable Disk” icon in Windows Explorer and select “Eject” before disconnecting the Imageview. If you get an error message, use “Add/Remove Hardware” in the Windows Control Panel instead-it will direct you how to “Unplug or Eject Hardware”.

BINOCULAR INSTRUCTIONS

INSTALLING BATTERIES

Remove battery cover and insert batteries as directed in battery compartment. Replace battery cover.

TURNING THE CAMERA ON AND OFF

Raise the LCD display by pulling up on the sides of the display at the finger indents (see fig.2). Press and hold the “ON /OFF ” button until power turns on, as indicated by the red light on the back of the camera. The LCD screen will turn on and display the Bushnell logo, then turn off to conserve battery life. If you have installed new batteries,

	TFT LCD Display
Display (On/Off)
	View (Review/
5-Way Switch w/	Capture)
Menu Button
Binocular Focus

ON/OFF (Power)

SNAP (Shutter Release)	USB Port, SD Card Slot,
	Power Indicator Light,

Remote Button Jack 1