Autostart for recording a cycling exercise
If you start from the Time of day display, press OK briefly to enter the Measure mode. Your exercise recording automatically starts/ pauses as you start/ stop cycling.
If you want to record cycling information only, start cycling after the heart rate reading 00 appears on the display. If you want to record both cycling and heart rate information keep the bike still until your heart rate appears on the display.
Exercise recording mode
If you are starting from the Time of day display, press and hold OK.
Exercise information will be stored in an exercise file only when the stopwatch is running. The ongoing recording is indicated with a graphic bar that runs continuously on the display.
If your preset exercise requires cycling settings, Set Bike is displayed for a few seconds. In order to start the exercise set you need to select bike 1 or 2 by pressing and holding the down button until the desired set is displayed.
The choice is displayed in the lower right corner: b0= bike off
b1= bike 1 settings on b2= bike 2 settings on
C 48