Kenmore 4753 Tools needed for connecting the water inlet hoses, Parts supplied, Alternate Parts

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

•Pliers (that open to 19/16"[39.5 mm])

•Flashlight (optional)

Tools needed for installation

•Open end wrenches 14 mm and 13 mm

•Level

•Wood block

•Ruler or measuring tape

Parts supplied

D

A.	U-shaped	hose form	D. Transit bolt hole plug (4)
B.	Water inlet	hoses (2)	E. Beaded tie strap

C. Inlet hose washers (4)

Alternate Parts

Parts listed are available from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME ® (1-800-469-4663).

If You Have			You Will Need to Buy
Laundry tub or			Sump pump system (if not already
standpipe		taller	available)
than 96" (2.4 m)
Overhead		sewer	Standard	20 gal. (76 L), 30" (76.2 cm) tall
			drain tub or utility sink and sump pump
			(available from local plumbing suppliers)
Floor	drain		Siphon break, Part Number 285834;
			additional	drain hose, Part
			Number 8318155; and connector kit, Part
			Number	285835
Drain	hose too		4 ft (1.2 m) drain hose extension kit, Part
short			Number	285863
Water	faucets		2 longer	water fill hoses:
beyond reach of fill			6 ft (1.8 m) Part Number		76314
hoses			10 ft (3.0 m) Part Number		350008

Pedestal

You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (25.4 cm) or a 15.5" (39.4 cm) pedestal. The pedestal will add to the total height of the washer.

			Optional	pedestal
To order, call your local Sears store. For further information,
please call 1-800-4-MY-HOME				® (1-800-469-4663).
Pedestal	Height	Approximate		height	Color	Model
		with	washer			Number	iiii
	i			.....................................................................	;i
10" (25.4	cm)	46"	(116.8 cm)		White	46822
15.5" (39.4 cm)		51.5" (130.8 cm)			White	57822

Stack Kit

Are you planning to stack your washer and dryer? To do so, you will need to purchase a Stack Kit.

To order, call your local Sears store. Ask for the stack kit (Part Number 8572546). For further information, please call

1-800-4-MY-HOME® (1-800-469-4663). Follow instructions included with the kit. See "Location Requirements."