Kenmore 4753 manual Hot, Warm, Cycle Suggested Load Type Available Options

TemperatureGuide WashWaterTemperature Suggested Fabrics

HOT	Whites	and	pastels
	Heavy	soils
WARM	Bright	colors
	Moderate to light			soils
COLD	Colors	that	bleed	or fade
	Light soils

Auto Temp Control

ATC (Auto Temp Control) electronically senses and maintains a uniform water temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned ON when a cycle is selected. See Preset Cycle Settings table in "Cycles."

•ATC works for the wash temperature with Warm/Warm, Warm/Cold, and Cold/Cold settings.

•ATC works for the rinse temperature with the Warm/Warm setting.

•The Cold rinse temperatures depend on the cold water at your faucet.

In wash water temperatures colder than 60°F (15.6°C), detergents de not dissolve well. Soils may be difficult to remove.

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these washer cycles.

CYCLE		SUGGESTED		LOAD TYPE				AVAILABLE	OPTIONS
							DelayStart	Prewash	2nd Rinse	Cycle Signal
Whitest	Whites	Soiled	white fabrics				v'	v'	v'	v'
Heavy	Duty	Heavily soiled		underwear, towels, shirts,		etc., made	v'	v'	v'	v'
		of cotton
Normal/Casual		Normally soiled blouses, shirts, overalls, etc., made					v'	v'	v'	v'
		of polyester, nylon, cotton, linen, or cotton blends
Express Wash		Small	loads of	2-3 lightly soiled	cotton,	polyester,	v'		v'	v'
		nylon,	and cotton blends.
Delicate		Curtains and delicate clothing,			dresses,	skirts, shirts	v'		v'	v'
		and blouses
Rinse/Drain & Spin		All loads					v'		v'	v'
Clean	Washer	No clothes					v'			v'

18