Kenmore 4753 manual Donotgroundtoagaspipe

EHectrical Shock Hazard

Plug into a grounded 3 prong outBet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Faimure to foffow these instructions can resuJt in death,

fire, or emectrical shock.

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

This washer is equipped with a power supply cord having a 3 prong grounding plug.

To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

•Donotgroundtoagaspipe.

•Checkwithaqualifiedelectricianifyouarenotsurethe washerisproperlygrounded.

•Donothavefuseintheneutralorgroundcircuit.

GROUNDING mNSTRUCTJONS

For a grounded, cord-connected washer:

This washer must be grounded. Hnthe event of a malfunction or breakdown, grounding wilI reduce the risk of electrical shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING:	Hmproper connection	of the equipment-
grounding	conductor can result in a	risk of electric shock.

Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on the appliance.