Important Safety Instructions
IMPORTANT: READ AND SAVE THIS OWNER’S GUIDE FOR FUTURE
REFERENCE.
This chapter contains important safety, operation, and installation instructions for the Xanbus Automatic Generator Start (AGS). Each time, before using the AGS, READ ALL instructions and cautionary markings on or provided with the AGS and all appropriate sections of this guide.
IMPORTANT:
1.If the Xanbus Automatic Generator Start (AGS) is inoperative, see “Warranty and Return Information” on page 38 for guidance.
2.The Xanbus Automatic Generator Start (AGS) contains no user- serviceable parts. For obtaining service, see “Warranty and Return Information” on page 38 for guidance.
3.Protect the Freedom SW Automatic Generator Start from rain, snow, spray, and water.
4.Disable the generator’s starting circuit by disconnecting the starter battery, spark plug, et cetera, before wiring this device.
5.To reduce the risk of electrical shock, put the Xantrex Xanbus system into Standby before working on any circuits connected to it.
See “Putting the AGS in Standby Mode” on page 67.
6.Disable the automatic starting circuit and/or disconnect the generator from its starting battery to prevent accidental starting while performing maintenance.
EXPLOSION HAZARD
This equipment is not ignition protected. To prevent fire or explosion, do not install the unit in compartments containing flammable materials or in locations that require
Failure to follow these instructions can result in death or serious injury.
SAFETY HAZARD
Disable the Xanbus Automatic Generator Start (AGS) if the generator or vehicle equipped with the generator is in an enclosed building or area where the generator exhaust is not vented to the outside.
Failure to follow these instructions can result in death or serious injury.
iv | Xanbus Automatic Generator Start (AGS) Owner’s Guide |