Clarity XLC2 manual Amplify Incoming Sounds Handset, To program a memory location

XLC2 Programming / Dialing Memory Keys

XLC2 BOOST Function (Amplification)

E

The XLC2 has two direct (one- touch) memory locations and

B

Amplify Incoming Sounds (Handset)

N G

10 indirect (two-touch) memory locations on the telephone (0-9) that can be programmed to dial frequently called numbers of up to 24 digits.

LK	M
	E
	M
A	D
2B
	3E

1.While on a call, press the

BOOST button to engage the

additional amplification (up to

50dB); the TALK button turns

red.

!

BOOST

A

L

I

S

H

To program a memory location:

1.Press the MEM button.

2.Dial the number you wish to store.

3.Press the MEM button again.

4.Press either the emergency button or the number on the dial pad to which you wish to store the number.

5.A long beep will indicate the programming process is complete.

NOTE:The TALK button blinks (green) during the programming process; it will stop blinking when the programming process is complete (at step 5, above).

To replace a stored number, simply reprogram a new number in its place - follow steps 1-5 above.

To dial a stored number:

1.A or B - press A or B when the handset is not in use.The

2.Adjust the VOLUME rotary

control to achieve the desired

sound level (up to 50dB of

amplification).

3.Adjusting the TONE switch

allows you to customize your

hearing experience. Since

we all have different hearing

preferences, we suggest

exploring each setting to find

the one most comfortable for

you.The three available settings

are:

	!
	BOOST
TONE	3
	2
	1

phone dials the stored number. (Or you can press TALK,

then press A for the same result).

2. 1-0 - press TALK, press MEM, press 1 (or any other

numeric button).The phone dials the stored number.

1 - Flat frequency response: best for hearing aid users;

2 - High frequency emphasis: best used to hear high frequency sounds;

3 - MBC (Multi-Band Compression): makes words clearer and easier to understand.

20 21