Clarity manual XLC2 Feature List & Overview Base

XLC2 Feature List & Overview - Base

8

7
VOLUME
6	11
SILENT

IN USE/		POWER	9	10	12	13
CHARGE
	FIND

4 5

3

1 2

1.LINE: Insert one end of your phone line here.

2.POWER: Insert power adapter’s round end here.

3.Battery door: Remove this to access the backup battery compartment.

XLC2 Feature List & Overview - Base

4.Visual Ringer (Base): Lights up when phone rings.

5.IN USE / CHARGE Light: The light turns green if the phone is in use, and turns red when it is charging.

6.POWER LED (light): This light is lit green when the power is on.

7.SILENT: Press if you want to turn off the base ringer.The button is backlit with a red light when the ringer is off.

8.VOLUME (UP / DOWN): Use these arrow keys to increase / decrease the ringer volume on the base.The volume adjustment can only be done while the phone is not in use.

9.FIND: Press this key to locate the handset. Once the handset is found, press the TALK key to end the location sounds.

10.AUTO BOOST OFF / ON: BOOST override function. Sets the state of the BOOST function at the beginning of each call (see BOOST FUNCTION (AMPLIFICATION) section).

11.TONE / PULSE: Choose the appropriate dialing mode according to your local settings.

12.VOICE ASSIST OFF / ON: Set switch to ON if you wish to hear the numeric keys pressed during dialing, and (if your phone line is equipped with CID service, purchased separately from your local telephone service provider) the digits of the incoming call. If you do not have CID, the ON option turns on the Voice Assist function for the dialed digits only.

13.RINGER STYLE: Use this key to choose the most comfortable base ring tone for your environment.There are six ring tones available. (This adjustment needs to take place while the phone is not in use.)

E

N G L I S H

12 13