Clarity manual XLC2 Auto Boost Function, XLC2 Outgoing Speech Amplification OSA, Call, Heard

XLC2 AUTO BOOST Function

On the back of the XLC2 base, there is an AUTO BOOST ON / OFF switch, to enable the Auto Boost Function.

When this is set to “ON,” the Boost function is automatically enabled every time the phone is picked up - the call starts in Boost ON mode.

When the Auto Boost Override switch is set to “OFF” (default setting), the Boost function turns off after the phone is hung up - the call starts in Boost OFF mode.

Setting this switch to “ON” is recommended if all of the users of the telephone need the additional amplification. Setting this switch to “OFF” is useful when people with varying hearing abilities use the phone.

During a call, pressing the BOOST button toggles the Boost function ON or OFF according to the user’s needs.

WARNING:VOLUME MAY BE LOUD!

XLC2 Outgoing Speech
Amplification (OSA)	E
This function amplifies the level of your voice, in case your	N
	G
voice is perceived as being too quiet by the other person on
the call.	L
	I
	S
To enable this function, press and hold the BOOST button	H
for three seconds.The phone beeps and the TALK button
backlight turns orange to indicate that the function is active;
the function can be enabled/disabled while on a phone call
by pressing and holding the BOOST button until the beep is
heard.

To return to the default setting for your voice volume level, press and hold the BOOST button again for three seconds. You will hear a beep confirming that the function is disabled. To verify, the phone’s TALK button should no longer be orange when you are on a call.

NOTES:

1.IMPORTANT: In order to experience the best audio quality for both parties during a call, we recommend you turn on this function only if your voice is considered too quiet.

2.OSA is also available in speakerphone mode.

22 23