Clarity manual XLC2 Battery Safety Information, XLC2 Low Battery Indication, Handset

XLC2 Battery Information

2. Open battery	OFF/ON T P OFF/ON STYLE
	AUTO TONE/ VOICE
compartment door - push	BOOST PULSE ASSIST RINGER
	HIGH OUTPUT
	RINGER
in the direction of the arrow.

Open battery compartment door here.

XLC2 Battery Safety Information

Dispose of used batteries according to the instructions.

1. Do not dispose of the battery in a fire as it may explode.

Check with local codes for possible special disposal

E

N G L I S

3.Install batteries according to the polarity shown inside the battery compartment.

NOTE:To replace handset batteries or to install base backup batteries, use ONLY standard rechargeable AAA NiMH batteries - 600mAh.

XLC2 Low Battery Indication

Handset

1.The handset beeps every 15 seconds in OFF HOOK mode. It does not beep in ON HOOK mode.

2.The TALK button blinks red twice every two seconds in ON HOOK mode. It will not flash an alert in OFF HOOK mode.

Base (if optional batteries are installed)

1.The In Use / Charge light will blink red once every five seconds in ON HOOK mode.

WARNING: Use rechargeable batteries only. Do NOT use alkaline batteries!

instructions.

2. Do not open or mutilate the battery. Released electrolyte

is corrosive and may cause damage to the eyes and skin. It

may be toxic if swallowed.

3. Exercise care in handling batteries in order not to

short the battery with conducting materials such as rings, bracelets and keys.The battery or conduction material may overheat and cause burns.

4.Remove batteries when they are discharged and when the equipment will not be used for an extended period of time. Dispose of batteries according to local environmental laws.

5.Do not disassemble, heat, crush, deform or puncture batteries.

6.Do not attempt to charge non-rechargeable batteries.

7.Keep batteries out of the reach of children.

WARNING: Risk of explosion if battery is replaced by an incorrect type.

H

18 19