Mute MIC, Transfer Call, Hold Call, Hold and NEW

CATL-User guide internal pages_final.qxd 01/09/2005 16:34 Seite 6

below. In these options you may: mute the microphone, transfer the call to your mobile phone, put the call on hold, as well as putting a call on hold to make a new call. By pressing the Hang-up Button [7] you return to the previous menu.

1.MUTEMIC

Press the Select Button [6] to mute the microphone during the conversation. You can activate the microphone again by entering the menu in the same way.

2.TRANSFERCALL

Press the Select Button [6] to transfer the call to the mobile phone for pri- vacy. The Car Kit may be disconnected from the phone after transferring the call. You can transfer again the call to the Car Kit by entering the menu in the same way.

3.HOLD CALL

Press the Select Button [6] to put the call on hold. You can activate again the call entering the menu in the same way.

4.HOLDANDNEW

If your mobile phone supports Bluetooth Hands-free profile version

1.0or later, you can press the Select Button [6] to put the call on hold and make a new call. You will then access the menu for call making. Refer to Multiple Calls section for managing multiple calls.

During normal conversation the Visual display [3] will show the following symbol:

9345678

1.MENU 2.END

When the microphone is muted the Visual display [3] will show the follo- wing symbol:

/o9345678

1.MENU 2.END

If the call is on hold, the Visual display [3] will show the following symbol:

79345678 1.MENU2.END

7. MANAGING MULTIPLE CALLS

If your mobile phone supports Bluetooth Hands-free profile version

1.0or later, you can handle multiple calls in the way indicated below.

Receiving a call during conversation

If you are within a conversation, and you receive another call, you will see a display like the following:

93456< UNKNOW 1.YES 2.NO

To reject the new incoming call, press the Hang up Button [7], and you will stay in a normal conversation. To accept new incoming call, press the Answer Button [5]. In this case you will have two options:

93456<UNKNOW

1.HOLD2.END

If you press the Hang up Button [7], you will end the active call and accept the new incoming call. In this case, you will stay in a normal conversation. Alternatively, if you press the Answer Button [5] you will accept the new inco- ming call and put active call on hold.

Making a call during conversation

If you are within a conversation, and you wish to make another call, you can put the active call on hold and make a new call, as indicated in the Managing conversations section.

Handling several calls

If you have two calls at the same time, one active and one on hold, an arrow up in the display will show the call that is on hold.

793456 UNKNOW

1.MENU2.END

If you press the Hang up Button [7] you will end the active call and continue with the call on hold as in a normal conversation. If you press the Answer Button [5] you can do the following:

1.MICMUTE

Press the Select Button [6] to mute the microphone during the conversation. You can activate the microphone again by entering the menu in the same way.

2.TRANSFERCALL

Press the Select Button [6] to transfer the call to the mobile phone for pri- vacy. The Car Kit may be disconnected from the phone after transferring the

call. You can transfer again the call to the Car Kit by entering the menu in the same way.

3.SWITCH

Press the Select Button [6] to switch from active call to call on hold. You can switch again between calls by entering the menu in the same way.

4.MULTIPARTY

Press the Select Button [6] to put both calls in multiparty.

8. MANAGING PHONE BOOK

Storing numbers in Phone Book

You can only store in the Phone Book numbers you have in the Received Calls or Missed Calls lists. To do so, you need to go to the Making Calls menu and select one of the lists as shown in the Making Calls section. Then, press the Answer Button [5] until you find the number you want to store.

D.934567817