Checking your telephone
When you first plug in your 9516CW, the telephone initializes itself and then you may see a message asking you to make a language selection. Follow the directions on the display to select a language.
Your telephone also runs a test to ensure that the line cord is connected properly. If the test fails, the display prompts you to check the line cord. Make sure that all connections are fastened securely.
Desk Mounting
Lower the stand into the slots on the base of the telephone, as shown above.
Slide the stand back until it clicks into the locked position.
Optional Wall Mounting | † |
|
Lower the stand into the slots on the base of the telephone, as shown above.
Slide the stand back until it clicks into the locked position.
Adjusting the Display | The Set Options Key |
Place your 9516CW on a table or hang it on a wall, then adjust the display.
Move the sliding panel over to the right to reveal the Set Options key.
†We recommend that you use a wall mounting plate which is available through your telephone company. If you are going to wall mount your 9516CW, use the 20 cm (8”) line cord supplied with your telephone.
Note: The Ringer Equivalence Number (REN) is 1.4B for the 9516CW telephone. Please see the base of your telephone or the Regulations sheet for more regulatory and safety information.
5