Useful Telephone Settings
6Press {ih}.
Note:
LThe handset will not vibrate while on the charger.
Changing ringer types
You can change the ringer type used by the handset.
“EXT Ringer Type”: Selects the ringer for outside calls.
“INT Ringer Type”: Selects the ringer for intercom calls.
“Paging Tone”: Selects the ringer heard when the base unit pages the handset. “Private Ring”: Allows you to set a different ringer for each private category (for Caller ID subscribers only).
1Press $(centre of joystick).
2Select t, then press ,.
3Select “Ringer Option”, then press
,.
4Select the desired item, then press
,.
LThe ringer sounds using the current ringer type.
5Select the desired ringer type, then press ,.
6Press {ih}.
Note:
LIf you select one of the melody ringer types, the ringer will continue to sound for several seconds if the caller hangs up before you answer. You may hear a dial tone or no one on the line when you answer a call.
LThe preset melodies in this product are used with permission of
Tone options
Turning key tones on/off
Key tones are tones heard when keys are pressed. Includes confirmation tones and error tones.
1Press $(centre of joystick).
2Select t, then press ,.
3Select “Tone Option”, then press ,2 times.
4Select “On” or “Off”, then press ,.
5Press {ih}.
Display options
Selecting the standby mode display “Base Number”: The current base unit number is displayed.
“Handset Name”: The name of the handset is displayed.
“Off”: Only the current date and time are displayed.
1Press $(centre of joystick).
2Select t, then press ,.
3Select “Display Option”, then press ,2 times.
4Select the desired setting, then press
,.
5Press {ih}.
Selecting the talk mode display
You can change what is shown on the display when you make a call.
“Talk Time”: The length of the current call will be displayed.
“Phone Number”: The phone number you dialled will be displayed.
1Press $(centre of joystick).
2Select t, then press ,.
3Select “Display Option”, then press
,.
24