2)Other
•Bit and socket condition: Material, amount of play, etc.
•Use of a universal joint or socket adapter
•User: Manner in which the tool is applied to the bolt, strength with which the tool is held, manner in which the tool’s switch is engaged
•Condition of object being tightened: Ma- terial, seating surface finish
Setting the tool to configuration mode
1.Turn off the control panel.
•If the control panel is on, remove and then reinsert the battery pack.
2.Engage the switch while pushing the 
button and then release both the 
but- ton and the switch.
•After all the LED lamps have turned off, the control panel will flash and change to configuration mode.
NOTE:
•Tools ship from the factory set to “F” mode (torque control function off).
•The control panel will turn off if the tool is not operated for a period of 5 min- utes.
Configuring the torque clutch setting
(1)
(2)
Display
Battery indication lamp
1.Press the 
and 
buttons to select the clutch setting that is appropriate for the work being performed.
As the |
| button | As the button |
| |||
is pressed | is pressed | ||
29 
30 
F 
1 
2
28 
… 
3 
•“F” indicates that the torque control func- tion is off.
- 10 -