Porter-Cable 1000003754 instruction manual Problem Cause Correction

PROBLEM		CAUSE	CORRECTION
Motor will not run.	Fuse	blown, circuit	Check fuse box
	breaker tripped.		for blown fuse and
			replace as necessary.
			Reset circuit breaker.
			Do not use a fuse or
			circuit breaker with
			higher rating than
			that specified for your
			particular branch circuit.
			Check for proper
			fuse. You should use
			a time delay fuse.
			Check for low
			voltage problem.
			Check the
			extension cord.
			Disconnect the other
			electrical appliances
			from circuit or operate
			the compressor on its
			own branch circuit.
	Extension cord is wrong		Check the
	length or gauge.		extension cord.
	Loose	electrical	Check wiring connection
	connections.		inside terminal box.
	Faulty motor.		Have checked by
			a Trained Service
			Technician.
	Motoroverloadprotection		Refer to "Motor Overload
	switch has tripped		Protection" under
			Operation. If motor
			overload protection
			trips frequently,
			contact a Trained
			Service Technician

19 - ENG 1000003754