Panasonic EY7840 Introduction, General Safe TY Rules, Work Area Safety, Electrical Safety

Page 4

. INTRODUCTION

This tool is a Rotary Hammer for drill- ing in concrete. In addition, the tool has a “rotation only mode” without hammering. The mode is suitable for drilling and screw-fastening.

. GENERAL SAFE-

TY RULES

WARNING! Read all instructions

Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your main operated (corded) power tool and battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

Work Area Safety

1)Keep work area clean and well lit. Cluttered or dark areas invite acci- dents.

2)Do not operate power tools in ex- plosive atmospheres, such as in the presence of flammable liq- uids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

3)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

1)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching out- lets will reduce risk of electric shock.

2)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of elec- tric shock if your body is earthed or grounded.

3)Do not expose power tools to rain or wet conditions.

Water entering a power tool will in- crease the risk of electric shock.

4)Do not abuse the cord. Never use

the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords in- crease the risk of electric shock.

5)When operating a power tool out- doors, use an extension cord suit- able for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

Personal Safety

1)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while oper- ating power tools may result in per- sonal injury.

2)Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

3)Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying power tools with your fin- ger on the switch or plugging in the power tools that have the switch on invites accidents.

4)Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

5)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

6)Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.

Loose clothes, jewelry or long hair can be caught in moving parts.

7)If devices are provided for the connection of dust extraction and collection facilities, ensure these

- 4 -

Image 4
Contents Model No EY7840 ImportanteIndex/Index/Indice English Français Español PáginaAdaptateur de mèche EY9HX403E Adaptador de broca EY9HX403E Work Area Safety Electrical SafetyPersonal Safety IntroductionPower Tool Use and Care Battery Tool Use and CareService Specific Safe TY RulesImportant Safety Instructions For BatterySymbol Meaning Do not attempt to disassemble the battery pack housing Assembly Bit adapterTo insert the bit To remove the bitClutch Torque Setting OperationControl Panel Forward/Reverse LeverBattery Pack For Appropriate Use of Bat- tery pack Installing the Shoulder StrapLi-ion Battery pack EY9L40 Battery low warning lampBattery Charger Charging Battery Pack LifeBattery Recycling Common Cautions for the Li- ion/Ni-MH/Ni-Cd Battery PackNi-MH/Ni-Cd Battery Pack During charging, the charging lamp will be litLamp Indications Accessories MaintenanceUsage Suggestion Specifications Set according to the work environment of the siteLi-ion battery pack Battery ChargerNi-Cd/Ni-MH battery pack Consignes DE Securite GENE- Rales Sécurité électriqueSécurité personnelle AVERTISSEMENT! Veuillez lireMaintenez les outils de coupe af- fûtés et propres Utilisation et soins de l’outil mécaniqueLes outils de coupe bien entrete Utilisation et soins de la batterie de l’outil Regles DE Securite PAR- TiculieresRéparation Chargeurdebat Symbole SignificationInstructions de sécurité impor- tantes Norme d’entrée Ampères Mise EN Garde UtilisationPour insérer la mèche Fonctionnement Fixation ou retrait de la bat- terie autonomeAdaptateur de mèche Levier d’inversion marche avant-marche arrièrePanneau de commande Gâchette de commande de vitesseCommutateur martelage/ perforation Ajustement du couple d’em- brayageInstallation de la dragonne BatterieBatterie autonome Li-ion EY9L40 Témoin d’avertissement de sur- chauffeBattery Chargeur de batterie RechargeRecyclage de la batterie auto- nome Batterie autonome Li-ionBatterie autonome Ni-MH/Ni-Cd Complètement la batterie avant son utilisationEntretien Indication DU VoyantAccessoires Suggestion Pour L’UTILISATIONCaracteristiques Techniques Réglez conformément à l’environnement du lieu de travailBatterie autonome Li-ion Chargeur DE BatterieBatterie autonome Ni-MH/Ni-Cd Introducción DAD GeneralesSeguridad eléctrica Seguridad personalUso y cuidados de her- ramientas eléctricas Uso y cuidado de la her- ramienta a bateríaEn manos de usuarios no entrenados Mantenga las herramientas de corte afiladas y limpiasDAD Específicas ServicioMente y la unidad puede dañarse Símbolo SignificadoPara EL Carga Instrucciones de seguridad im- portantesMontaje Puede deteriorar la batería guardadaNo incinere la batería. Puede explo- tar en el fuego PrecauciónFuncionamiento Adaptador de brocaPalanca de avance/inversión Para desmontar la brocaPalanca de conmutación de martillo/taladro Ajuste del par del embragueDisparador del control de velocided variable Luz LEDLuz de advertencia de sobrecalenta- miento Instalación de la correa al hombroLuz de advertencia de batería baja Atención Para batería Li-ión, EY9L40Batería de Li-ión Batería Ni-MH/Ni-CdNota Enchufe el cargador en la fuente de alimentación de CAMantenimiento Para la limpiezaAccesorios Sugerencias Para EL USOEspecificaciones Unidad PrincipalBatería Memo Memo Panasonic Consumer Electronics Company