Connecting Devices to Your HP Brio PC
Connecting Devices to Your HP Brio PC
Caution Check that the correct power supply voltage is selected for your country (the voltage is set during manufacturing and should already be correct).
Before starting up the PC, connect devices and power cords to the rear of the PC as shown below:
The connectors are
connectors are shaped to go in one way only | . |
Connecting a Mouse, Keyboard, Power Cords and a Monitor.
Keyboard (purple) | Mouse (green) |
| Monitors & |
Monitor (blue) | Cards |
If your PC has an | |
To connect a monitor | card, connect the monitor cable to |
to your HP Brio, refer | a connector on the card. For cards |
to the manual that | with 2 connectors, you may need |
came with the monitor. | to connect the monitor to the |
| connector if using a flat panel |
| display. |
|
|
Power
Connector
(check the voltage is correct before connecting)
3