Trane Custom Climate Changer Air Handlers Outdoor Unit Weather Hoods, Bag or Cartridge Filters

Installation

Bag or Cartridge Filters.

1Disconnect power to the unit.

2Keeping the bag filters folded, slide each filter into the filter rack, pushing them tightly against the unit. Pleats should be in the vertical position.

3If using optional pre-filters, slide them into the appropriate filter rack.

4If block-offs are provided with the unit, slide the block-offs into the filter track.

5Close and secure the access door, making certain the door closes snug against the rack.

Note: The block-off is intended to make a seal when the access door is closed. It may require a few adjustments to ensure a proper seal.

Outdoor Unit Weather Hood(s)

1Per the unit drawing determine mounting location of the unit weather hoods.

2All weather hoods have been pre-fit on the unit and removed for separate shipping at the factory. Remove any factory mounted screws located in the weather hood mounting location.

3Using the factory provided screws mount the weather hoods to the unit.

Note: Note it is required that the hoods be sealed to the unit using field provided caulk or gasket.

Figure 25. Filter block-off placement

CAH-SVX01A-EN 27