ICP-CC404 Installation Guide 6.0 System Functions
The default Master Code is 2580 and is User Code 1. You can program multiple Master Codes. Refer to Section 13.3 User Code Priority on page 52 for more information.
To access a Master Code function, enter the Master Code and press the corresponding function digit and the [AWAY] button. The Master Code functions are listed in Table 25.
Table 25: Master Code Functions
|
|
Function | Description |
0 | Reserved |
1 | Add, change, and delete User |
| Codes/Remote Radio User Codes |
| (Sections 6.2.1 on page 32 and 6.2.2 on |
| page 32) |
|
|
2 | Change domestic phone numbers |
| (Section 6.2.3 on page 33) |
3 | Change Telco Arm or Disarm Sequence |
| (Section 6.2.4 on page 34) |
|
|
4 | Set zones for STAY Mode 2 |
| (Section 6.2.5 on page 35) |
5 | Turn outputs on and off |
| (Section 6.2.6 on page 36) |
6 | Set the date and time |
| (Section 6.2.7 on page 36) |
7 | Walk Test Mode |
| (Section 6.2.8 on page 36) |
8 | Event Memory Recall Mode |
| (Section 6.2.9 on page 36) |
9 | Reserved |
6.2.1Changing and Deleting User Codes
This function allows a Master Code holder to change or delete a User Code.
1.Enter your Master Code and press [1][AWAY]. Three beeps sound and the STAY and AWAY indicators flash.
2.Enter the number of the code (1 to 8) you want to change and press [AWAY].
Two beeps sound and the corresponding zone indicator lights.
3.Enter the new code and press [AWAY]. Two beeps sound and the STAY and AWAY indicators turn off.
4.Repeat this procedure to change other User Codes.
This function ends automatically if you do not press a button within 60 sec or if you press [AWAY].
One long beep indicates that the code already exists or that you entered an incorrect user number.
Example
To program User Code number 2 as 4627, enter:
[2 5 8 0 1][AWAY][2][AWAY][4 6 2 7][AWAY]
To delete a User Code:
1.Enter your Master Code and press [1][AWAY]. Three beeps sound and the STAY and AWAY indicators flash.
2.Enter the number of the code (1 to 8) you want to delete and press [AWAY].
Two beeps sound and the corresponding zone indicator lights.
3.Press [STAY] to delete the User Code.
Two beeps sound and the STAY and AWAY indicators turn off.
4.Repeat this procedure to delete other User Codes.
This function ends automatically if you do not press a button within 60 sec or if you press [AWAY].
One long beep indicates that the code already exists or that you entered an incorrect user number.
Example
To delete user code number 3, enter:
[2 5 8 0 1][AWAY][3][AWAY][STAY]
6.2.2Changing and Deleting Remote Radio User Codes
This function allows a Master Code holder to change or delete a remote radio User Code.
To add or change a remote radio User Code:
1.Enter your Master Code and press [1][AWAY]. Three beeps sound and the STAY and AWAY indicators flash.
2.Enter the number of the code (9 to 16) you want to change and press [AWAY].
Two beeps sound and the corresponding codepad indicators light. Refer to Table 26.
Table 26: Remote Radio Numbers Displayed by the Codepad Indicators
User |
|
| Zone Indicators |
|
| MAINS | |||
No | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Indicator |
9X 
X
10 |
|
|
|
|
|
| X |
11 | X |
|
|
|
|
| X |
12 |
| X |
|
| X | ||
13 |
|
| X |
|
|
| X |
14 |
|
|
| X |
|
| X |
15 |
|
|
|
| X |
| X |
16 |
|
|
|
|
| X | X |
32 | Bosch Security Systems, Inc. 12/08 |