To Clean:
IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners, bleach or rust removers.
1.Remove the burner cap and burner base and clean according to “General Cleaning” section.
2.Clean the gas opening with a damp cloth.
3.Clean clogged burner ports with a straight pin as shown. Do not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted, contact a trained repair specialist.
Even-Heat™ ChromeElectricGriddle
(on some models)
AB
4.Replace the burner cap, making sure the alignment pins are properly aligned with the burner cap.
20,000 Btu/h Ultra Power™
Burner
A
A. Incorrect
B. Correct
B
15,000 Btu/h Professional Burner
A
A. Incorrect
B. Correct
B
5,000 Btu/h Simmer/Melt Burner
A
A. Incorrect
B. Correct
B
5.Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, do not service the sealed burner yourself. Contact a trained repair specialist.
A.Griddle
B.Drip tray
The
■Remove plastic film and clean with hot, soapy water prior to first use.
■To avoid scratching the griddle, do not place any pots or pans on the griddle.
■To avoid scratching the griddle, use only heat resistant plastic or wooden utensils.
■The griddle surface is ready to use, and does not need to be seasoned.
■Pouring cold water on a hot griddle may warp the griddle, resulting in an uneven cooking surface.
To Use:
1.Position the drip tray under the front edge of the griddle to catch grease and food residue.
2.Push in and turn the control knob to desired temperature.
3.Refer to the griddle Preheat Chart for preheat times.
The griddle light will turn off when the griddle has finished preheating. The griddle light will turn on and off during use to indicate that the griddle element is maintaining the selected surface temperature.
4.Place food on the griddle and cook to desired doneness.
Griddle Charts
The settings and times are guidelines only and may need to be adjusted for individual tastes.
11