Model EEG-141, 142, 143, 144
3-18. CHECK/REPLACE FILTER DRAIN PAN O-RINGS
To prevent oil leaking, and to keep filtering process operating properly, the filter drain pan o-rings should be inspected for nicks and tears at least every 3 months. Figure 1
Figure 1
1.Open the door, lift-up on the drain pan stop and pull-out the filter drain pan assembly, using the handle on the drain pan. Figures 2 & 3
Figure 2
This pan could be hot! Use protective cloth or glove, or severe burns could result.
2.Visually check the 3 o-rings on the tube of the filter drain pan for any cracks or breaks and replace if necessary.
Figure 3
3.To replace o-ring, use a small, flat-bladed screwdriver, pry up on the o-ring and pull off of end of tube. Roll new o-ring into notch on tube. Before pushing the filter drain pan back into position, lubricate the o-rings on the filter tube with fresh, cold oil.
Figure 4
