Henny Penny EEG-141, EEG-142, EEG-144 Usage Code Change SP-26, Dispose Requires Code ? SP-27

6-1. SPECIAL PROGRAM MODE (Continued)

1009

Model EEG-141, 142, 143, 144

Program Code Change (SP-25) (Continued)

If satisfied with code, press and “*CODE CHANGED*” shows in display.

If not satisfied with code, press and “*CANCEL” shows in display, then reverts back to “SP-25” and “CHANGE, MGR CODE? 1=YES”. Now the above steps can be repeated.

Usage Code Change (SP-26)

This allows the operator to change the reset usage code (factory set at 1, 2, 3) to reset the usage amounts of each product. See Review Usage step in Information Mode.

Press button and “SP-26 CHANGE USAGE CODE?

1=YES” flashes in the display. Press and “ENTER NEW CODE, P=DONE, I=QUIT show scrolls through the display. Press the product buttons for new code.

If satisfied with code, press and “REPEAT NEW CODE, P=DONE, I=QUIT, shows in display. Press same code buttons.

If satisfied with code, press “*CODE CHANGED*” shows in display.

If not satisfied with code, press and “*CANCEL” shows in display, then reverts back to “SP-26” and “CHANGE, USAGE CODE? 1=YES”. Now the above steps can be repeated.

Dispose Requires Code ? (SP-27)

Press button and “SP-27 DISPOSE REQUIRES CODE ?” flashes in the left display. Press the or buttons to choose YES or NO. If set to YES, code 1, 2, 3 must be entered to discard the oil from the vat, using the Dispose Mode.

Longer Fill Time (SP-28)

Press button and “SP-28 LONGER FILLTIME ENABLED?” flashes in the left display. Press the or buttons to choose YES or NO.

Let User Exit Fill (SP-29)

Press button and “SP-29 LET USER EXIT FILL”

flashes in the left display. Press the or buttons to choose YES or NO. If YES is chosen, the user can exit the Express FilterTM fill operation.

6-9