Henny Penny EEG-141, EEG-142, EEG-144, EEG-143 warranty Installation, Unpacking

Page 13

Model EEG-141, 142, 143, 144


	SECTION 2. INSTALLATION

2-1. INTRODUCTION	This section provides the installation and unpacking instructions for
	the Henny Penny Evolution Elite fryer.
	Installation of this unit should be performed only by a qualified
	service technician.

Do not puncture the fryer with any objects such as drills or screws as component damage or electrical shock could result.

2-2. UNPACKING

Any shipping damage should be noted in the presence of the delivery agent and signed prior to his or her departure.

1.Cut and remove the metal bands from the carton.

2.Remove the carton lid and lift the main carton off the fryer.

1	2		5
	3		5
	3
		Figure 1	4
		Figure 1
609

3.Remove corner packing supports (4).

4.Cut the stretch film from around the carrier/rack box and remove it from the top of the fryer lid.

5.Cut and remove the metal bands holding the fryer to the pallet, and remove fryer from pallet.

Remove filter drain pan and JIB shelf from fryer before removing fryer from pallet or damage to the unit could result. Figure 1.

Take care when moving the fryer to prevent personal injury. The fryer weighs approximately 600 lbs. (272 kg) to 800 lbs. (363 kg).

2-1

Image 13

Contents OPERATOR’S Manual Page FM05-057-C Revised Technical Data for CE Marked Products Limited Warranty for Henny Penny Equipment Table of Contents Section Table of Contents Page Introduction FeaturesProper Care Assistance SafetySafety Page Unpacking InstallationSelecting the Fryer Location Leveling the Fryer GAS Supply GAS Supply GAS Supply Model EEG-141, 142, 143 Motor Bearings Lightingand Shutdown of the Burners Electrical RequirementsDimensions Page Refer to explanations on the next pages Operation Operating ComponentsDescription Operating ComponentsFunction Description Function JIB VAT Type Full or Split SET-UP ModeFill POT from Bulk Filling or Adding OILMorning START-UP Procedures Basic Operation Idle Mode Selectinga Product Withadifferent Setpoint Replacing the JIB OIL Guardian Auto Top-OffModel EEG-141 OIL Removing/Cleaning ReservoirReservoir Filling Oil ReservoirSmartfilter Express Smartfilter Express Filter ErrorCheck Filter Pan a new filter pad should be used on Daily FilteringDaily Filtering Discarding OIL from VAT Using Optional OIL Discard Shuttle Express FILTER? Changing the Filter PAD Changing the Filter PAD Removing and Cleaning Basket Rest CLEAN-OUT CLEAN-OUT ModeCLEAN-OUT Mode Rinse Complete YES no CHECK/REPLACE Filter Drain PAN O-RINGS Recovery Information for each Vat Actual Oil TemperatureInfo Button Stats Filter Button StatsProcedureFrequency Preventive Maintenance ScheduleClean Blower & Vents Page Information Mode Details Information ModeFunction Display EX DetailsTUE NEW OIL Reset usage data Change Product Names Product Program Mode Modifying Product SettingsAssign Button To Change Times and Temperatures Modifying Product SettingsAlarms 1 Quality Timer hold timeMixFilterdAfterFil TrackingX Number of Loads Filter Control Level 2 Programming Special Program ModeAudio Volume SP-4 Special Program ModeDegrees Fahrenheit or Celsius SP-1 Language SP-2Audio Tone SP-5 Idle Mode Enabled SP-7Liquid or Solid Cooking Oil Used SP-6 Mixed Filter Tracking Mode SP-8If Global is selected, press button GlobalClean-Out Temperature SP-12 Clean-Out Time SP-11Cooking Indicator SP-15 Polish Duration SP-9Engery Save Mode SP-18 2nd Volume SP-172nd Language SP-16 Fryer Type SP-19Bulk Oil Supply SP-22 Autolift Enabled SP-21Bulk Oil Disposal SP-23 Serial Number Log SP-24Dispose Requires Code ? SP-27 Usage Code Change SP-26Longer Fill Time SP-28 Let User Exit Fill SP-29Model EEG-141, 142, 143 Problem Cause Correction Troubleshooting Trouble Shooting GuideRemove the right side panel Display Cause Correction Error CodesClosed Error Codes Display Cause CorrectionPage Henny Penny Corporation Box Eaton,OH Toll free in USA