Henny Penny EEG-142, EEG-141, EEG-144, EEG-143 warranty MixFilterdAfterFil TrackingX Number of Loads

Page 56

5-1. MODIFYING PRODUCT SETTINGS (Continued)

5-3

Model EEG-141, 142, 143, 144

MixFilterdAfterFil TrackingX Number of Loads

13b. Press button until “FILTER AFTER...” flashes in the left display along, and the number of cook cycles between filters shows in the right display. Press the product buttons, or the and buttons, to change this value of 0 to 99 loads. This needs set for each product.

>Load Compensation, Load Compensation Reference, Full Heat, PC Factor<

14.Press button until “LD COMP” shows in the display, along with the load compensation value. This automatically adjusts the time to account for the size and temperature of the cooking load.

Press the product buttons, or the and buttons, to change this value of 0 to 20.

15.Press button until “LCMP REF” shows in the display along with the load compensation average temperature. (if load compensation is set to “OFF”, then “_ _ _” shows in display and setting cannot be programmed) This is the average

cooking temperature for each product. The timer speeds up at temperatures above this setting and slows down at temperatures below this setting. Press the product button, or the and buttons, to change this value.

16. Press button until “FULL HT” shows in the display along with the full heat value in seconds, which means the heat is on as soon as a timer button is pressed, for the programmed length of time. Press the product buttons, or the and buttons, to change this value of 0 to 90 seconds.

17. Press button until “PC FACTR” shows in the display along with the proportional temperature, which helps to keep the oil from over-shooting the setpoint temperature. Press the product buttons, or the and buttons, to change this value of 0 to 50 degrees.

•	Use	button to go back to previous menu items.
•	Press	button when finished with the current product, to
	return to the “SELECT PRODUCT” step.
•	Press and hold		button to exit PRODUCT PROGRAM
	Mode.
			609

Image 56

Contents OPERATOR’S Manual Page FM05-057-C Revised Technical Data for CE Marked Products Limited Warranty for Henny Penny Equipment Table of Contents Section Table of Contents Page Proper Care FeaturesIntroduction Safety AssistanceSafety Page Installation UnpackingSelecting the Fryer Location Leveling the Fryer GAS Supply GAS Supply GAS Supply Model EEG-141, 142, 143 Electrical Requirements Motor Bearings Lightingand Shutdown of the BurnersDimensions Page Operation Operating Components Refer to explanations on the next pagesFunction Operating ComponentsDescription Description Function JIB SET-UP Mode VAT Type Full or SplitFilling or Adding OIL Fill POT from BulkMorning START-UP Procedures Basic Operation Idle Mode OIL Guardian Auto Top-Off Selectinga Product Withadifferent Setpoint Replacing the JIBRemoving/Cleaning Reservoir Model EEG-141 OILReservoir Filling Oil ReservoirSmartfilter Express Filter Error Smartfilter ExpressDaily Filtering Check Filter Pan a new filter pad should be used onDaily Filtering Discarding OIL from VAT Using Optional OIL Discard Shuttle Express FILTER? Changing the Filter PAD Changing the Filter PAD Removing and Cleaning Basket Rest CLEAN-OUT Mode CLEAN-OUTCLEAN-OUT Mode Rinse Complete YES no CHECK/REPLACE Filter Drain PAN O-RINGS Actual Oil Temperature Recovery Information for each VatInfo Button Stats Filter Button StatsPreventive Maintenance Schedule ProcedureFrequencyClean Blower & Vents Page Information Mode Information Mode DetailsDetails Function Display EXTUE NEW OIL Reset usage data Assign Button Product Program Mode Modifying Product SettingsChange Product Names Modifying Product Settings To Change Times and TemperaturesAlarms 1 Quality Timer hold timeMixFilterdAfterFil TrackingX Number of Loads Level 2 Programming Special Program Mode Filter ControlSpecial Program Mode Audio Volume SP-4Degrees Fahrenheit or Celsius SP-1 Language SP-2Liquid or Solid Cooking Oil Used SP-6 Idle Mode Enabled SP-7Audio Tone SP-5 Filter Tracking Mode SP-8 MixedGlobal If Global is selected, press buttonClean-Out Time SP-11 Clean-Out Temperature SP-12Cooking Indicator SP-15 Polish Duration SP-92nd Volume SP-17 Engery Save Mode SP-182nd Language SP-16 Fryer Type SP-19Autolift Enabled SP-21 Bulk Oil Supply SP-22Bulk Oil Disposal SP-23 Serial Number Log SP-24Usage Code Change SP-26 Dispose Requires Code ? SP-27Longer Fill Time SP-28 Let User Exit Fill SP-29Model EEG-141, 142, 143 Troubleshooting Trouble Shooting Guide Problem Cause CorrectionRemove the right side panel Error Codes Display Cause CorrectionError Codes Display Cause Correction ClosedPage Henny Penny Corporation Box Eaton,OH Toll free in USA