Henny Penny OFE- 291 Filtering Instructions, Only Connectand Disconnect the Filter, Male Fitting

Model OFE- 291

3-9. FILTERING INSTRUCTIONS	c. Rinse the frypot interior. Especially work on hard to clean
(Continued)	areas, like the frypot bottom and burner tubes.
	d. After thorough rinsing with shortening, close the drain
	valve.
	e. Turn the COOK/PUMP switch to the OFF position.
	ONLY CONNECTAND DISCONNECT THE FILTER
	RINSE HOSE WHEN THE MAIN POWER SWITCH
	IS IN THE OFF POSITION. ALSO, USE A DRY
	CLOTH OR GLOVE TO AVOID BURNS. FAILURE
	TO DO THIS COULD RESULT IN SEVERE BURNS
	FROM HOT SHORTENING SPRAYING FROM THE
	MALE FITTING.
	f. Detach the hose and raise, the fitting end of hose, high for a
	minute to allow the remaining shortening in the hose to
	drain into the frypot.
	7. Turn COOK/PUMP switch to PUMP.
	8. When all shortening has been pumped into frypot turn
	COOK/PUMP switch off.
3-10. CHANGING THE FILTER	The filter envelope should be changed after 10-12 filterings, or
ENVELOPE	whenever it becomes clogged with crumbs. Proceed as follows:
	1. Move the COOK/PUMP switch to the OFF position.
	2. Remove and empty the condensation drain pan.
	3. Disconnect the filter union and remove the filter drain
	pan from beneath the frypot.
	Use protective cloth or glove when disconnecting the
	filter union or severe burns could result.
	If the filter pan is moved while full of shortening, use
	care to prevent splashing, or severe burns could result.
3-16	703