Henny Penny OFE- 291 manual Erase a Prod Preset a Prod Erase ALL

			Model OFE- 291
3-15. PROGRAMMING	The following are examples of copying and erasing products:
(Continued)	Copying
	Press	to select the presently displayed “COPY A PROD”
	option. “COPY __ TO __” shows in display. The first set of
	“_” is blinking. Select the product you wish to copy from, for
	example, by pressing the		button:

“COPY 2 TO __” shows in display.

Next, press product you want to copy to, for example, by pressing

. The controller responds with a confirmation message:

“COPY 2 TO 0?” “1=YES 2=NO”

Press (YES) and the controller copies product #2 to the

product #0 position (the #2 product is left intact) and the display shows “* COPIED *”, then returns to the “Select Prog Product” step with the #0 product already selected.

Press (NO), or don’t press any button for 20 seconds, the controller displays “X CANCELED X” and abandons the copy process. In this case no changes are made.

Erasing
On the “Select Prog Product” step, press		. “** OPTIONS **”
followed by “*1. COPY A PROD” shows in display.
Press	three more times to reach the “Erase All” option:
“*2. ERASE A PROD”
“*3. PRESET A PROD”
“*4. ERASE ALL”
Press	to select the presently displayed “ERASE ALL” option.

The controller responds with a confirmation message:

“ERASE ALL PROD ?” “1=YES 2=NO”

Press (YES) to confirm that you want to erase all products back to “empty” values. The controller responds by erasing each product individually...

“ERASING 1” “ERASING 2” “ERASING 3” “ERASING 4” “ERASING 5”

Then briefly displays “* ALL ERASED *” and finally, returns to the “Select Prog Product” display.

403 3-26