Henny Penny OFE- 291 manual Press to continue to Last Load

Model OFE- 291

3-18. INFORMATION MODE This mode gathers and stores historic information on the fryer and

operator’s performance. Press and at the same time

and “*INFO MODE*” shows on display. Press or

to access the steps and press to view the statistics within each step. Information Mode is intended for technical use, but the operator can view the following information:

1.E-LOG- last 10 errors and time they occurred

2.LAST LOAD - information about the most recent Cook Cycle, or the cycle presently in progress

3.DAILY STATS - information for the last 7 days.

4.REVIEW USAGE- information accumulated since the last time this data was manually reset

5.INPAVHDSF M - provides test of fryer inputs

6.OUTP - shows the state of heater and pressure

7.OIL TMP - temperature of shortening

8.CPU TMP - temperature of PC board

9.ANALOG - status of controller’s a-to-d converter

Press and hold to exit Information Mode at any time, or after 2 minutes, controls automatically exit back to normal operation.

1.E-LOG(error code log)

Press and “1A” (date & time) “*NOW*” shows in

display. This is the present date and time.

Pressand if a error was recorded, “1B” (date, time, and

error code information) shows in display. This is the latest error code that the controls recorded.

Pressand the next latest error code information can be

seen. Up to 10 error codes (1B to 1K) can be stored in the E-LOG Section.

Press to continue to LAST LOAD.

403 3-36