|
|
| Model OFE- 291 |
| The Special Program mode is used to set more detailed | ||
MODE | parameters listed below. | ||
| · Degrees Fahrenheit or Celsius | ||
| · Language: English, French, German, | ||
|
| Spanish, and Portuguese | |
| · | Systeminitialization | |
| · | Audio volume | |
| · | Audio tone | |
| · Type of shortening to be melted - liquid, solid | ||
| · | Idle Mode | |
| · | FilterTracking | |
| · | Product buttons | |
| · | ||
| · | ||
| · | Nominal amps reading | |
| · Amps reading low limit (percentage) | ||
| · Amps reading high limit (percentage) | ||
| · Program code change | ||
| · Usage code change | ||
| · Change shortening - | ||
|
| · Change shortening - | |
1.Press and hold 
for 5 seconds until
2.Enter code 1, 2, 3, and “SP- 1 “, “TEMP, UNITS” shows in the display.
If a bad code is entered, an alarm sounds and “BAD CODE” shows on the display. Wait a few seconds, the control reverts back to the Cook Cycle, and repeat the above steps.
To exit from the Special Program Mode at any time, press
and hold 
button for 2 seconds, or to roll back to
previous setting, press | . |
Degrees Fahrenheit or Celsius
b. The display flashes “SP- 1” and “TEMP, UNITS”, along
with “ºF” or “ºC”. Press to toggle from “ºF” to “ºC”, or vice versa.
1005 |