Henny Penny OFE- 291 manual Press SP-8C shows in the display, if YES

			Model OFE- 291
3-16. SPECIAL PROGRAM	f. Press	and “SP-8C” shows in the display, if YES
MODE (Continued)	was chosen in step e. “FILTER LOCKOUT AT…” and a
	value between 100% and 200% shows in display. Press
		to change this value.
	g. Press	and “SP-8D” shows in the display, followed
	by “LOCKOUT-HEAT OIL... and a temperature
	(preset at 300ºF (149ºC). When a filter lockout occurs, the
	fryer heats up to this set temperature, and the display shows
	“FILTER LOCKOUT/WAIT”. Then once the set
	temperature is reached, “FILTER LOCKOUT’/ “YOU
	*MUST* FILTER NOW” shows in display. Use
	to change this temperature setting.
	h. Now, go back to the Filter Cycle Mode step of the Pro-
	gramming Section, and program in the number of Cook Cycles
	between filtering.
	GLOBAL
	i. If “3,GLOBAL” is selected, “SP-8A” shows in the display,
	and followed by “GLOBAL FILTER CYCLES”. The right
	side of the display shows a digit, 1 to 99. Press			to
	set the desired amount of Cook Cycles between filters.
	In Cook Mode, the number of global Cook Cycles
	remaining shows in the center of the display.
	Ex: “---------	5x ----------	”.

j.Press and “SP-8B” shows in the display followed by “LOCKOUT ENABLED?” and “YES” or “NO”.

Press and release to choose yes or no

k.Press and “SP-8D” shows in the display, followed by “LOCKOUT-HEAT OIL... and a temperature (preset at 300ºF (149ºC). When a filter lockout occurs, the fryer heats up to this set temperature, and the display shows “FILTER LOCKOUT/WAIT”. Then once the set temperature is reached, “FILTER LOCKOUT’/ “YOU *MUST* FILTER NOW” shows in display. Use

to change this temperature setting.

l.Now, go back to the Filter Cycle Mode step of the Pro-

gramming Section. Press until “FILTER INCL” shows in the display. Each product must be set to “YES” to

be included in the filter tracking.

3-31 1005