Henny Penny OFE- 291 manual Clock SET

Page 7

 

 

 

Model OFE- 291

3-4. CLOCK SET

14. Press

and “CS-6, CLOCK MODE” shows in the

(Continued)

display, along with “1.AM/PM”.

 

 

“1.AM/PM” is 12 hour time, “2.24-HR” is 24 hour

 

time. Press

to change.

15.Press and “CS-7, DAYLIGHT SAVINGS ADJ” shows in the display, along with “2.US”.

Press to change to the following:

a.“1.OFF” = No automatic adjustments for daylight savings time.

b.“2.US” = Automatically applies United States daylight savings time adjustment. DST activated on the first Sunday inApril. DST de-activated on the last Sunday in October.

c.“3.EURO” = Automatically applies European (CE) daylight saving time adjustment. DST activated on the last Sunday in March. DST de-activated on the last Sunday in October.

16. Press and “CS-8, BEGIN NEW DAY” shows in display, along with “3:00AM”.

This setting indicates the time of day that statistics start accumulating for a new day. If set to 3:00AM, for example, then late night cook cycles and filter operations from midnight to 3:00AM Tuesday morning, are accumulated with Monday’s statistics.

The CS-8 value can be set from 12:00AM (midnight) to 8:00AM, in half hour increments (12:00AM,

12:30 AM, 1:00 AM, 1:30 AM, etc.). The default value for general market software is 3:00AM.

Pressto change the time the “new” day starts.

17.Clock Set is now complete. Press and hold to exit.

403

3-7

Image 7
Contents Operation Operating Components LID Operation Indicators SwitchesDescription Function Switches and Indicators Description Function Model OFE 403 Clock SET Clock SET Filling or Adding Shortening Product Racking Recommendations LINE. Failure to Follow These Instruc Above the Upper Frypot LevelindicatorBasic Operation Be Certain the Shortening is NeverAllow fryer to heat until Illuminates Unlatch and raise the lid cautiously Personal INJURY, FIRE, AND/OR Property Care ShorteningShortening Overflowingthe Frypot Which could Result in Serious BurnsFiltering Instructions Filtering Instructions Is in the OFF POSITION. ALSO, USE a DRY Rinse Hose When the Main Power SwitchFiltering Instructions Only Connectand Disconnect the FilterEnvelope Filter Pump Motor PROTECTOR-MANUAL Reset Cleaningthe Frypot Drained by slowly pulling the drain handle out towards you If hot shortening is present in the frypot, it must beDoes not boil over causing damage to controls Cleaning the FrypotPreventive Procedure FrequencyCleaning Nylatrons Monthly MaintenanceChange Product Names ProgrammingProgramming Programming Filter Cycle Mode OptionalGo to Idle after Done? Global Erase a Prod Preset a Prod Erase ALL Mode Special ProgramAudio Tone SP-5 Language SP-2 ModeAudio Volume SP-4 System Initialization SP-3Type of shortening to be melted Liquid or Solid SP-6 Idle Mode SP-7Mixed Press SP-8C shows in the display, if YES To filter the shortening. Press To change Special Program ScheduleClean-Out Temperature Sp-10 Product Buttons Sp-9 ModeClean-Out Temperature Sp-11 Usage Code Change SP-16 Mode Program Code Change SP-15Code Change Mode Shows in display If not satisfied with code, pressData LOGGING, Heat CONTROL, Tech MODE, and Stat Mode If satisfied with code, pressPress to continue to Last Load Function Displayex Information Mode Last LoadFunction Display EX Information ModeOutp H* P CPU TMP OIL TMPAnalog 1