Henny Penny OFE- 291 manual Switches, Indicators, Description Function

				Model OFE- 291
3-3.	SWITCHES AND		Refer to image at the end of this section.
	INDICATORS
Fig.	Item	Description	Function
No.	No.
3-2	1		Lights when the control calls for heat; the elements come on and
			heats the shortening
3-2	2	DigitalDisplay	Shows all the functions of the Cook Cycle, Program Modes,
			Diagnostic Modes, and alarms
3-2	3		Only used on models that create pressure in the frypot; this
			should not light
3-2	4		Flashes when the shortening temperature is not at the
			proper temperature for cooking product
3-2	5		Lights when the shortening temperature is 5° F below to
			15° F above the cooking temperature, signaling the operator
			that the shortening temperature is at the proper temperature
			for cooking product
3-2	6		Press to display the following fryer information and status:
			a. The temperature of the shortening
			b. The temperature setpoint
			c. Filter status
			d. The number of times filtered today
			e. The average no. of filters per day
			f. No. of times Cook Cycle was stopped early today
			g. No. of times Cook Cycle was stopped early in past week
			e. Oil Life Display (Only if “Change Oil” feature is enabled)
			f. Date and time
			If pressed in the Program Mode, shows previous settings.
			Pressing this along with	accesses the Information

Mode which has historic information on the operator and fryer’s performance

3-2	7 & 8	Used to adjust the value of the currently displayed setting in
		the Program Modes
1005		3-3