Cornelius 3 System Menus, Main Menu, Control Panel Menu Descriptions, Button Description

Page 21

Viper Service Manual

CONTROL PANEL MENU DESCRIPTIONS

The following section describes the information displayed on each control panel menu and the interactions and settings that are controlled by that menu.

System Menus

The system menu structure allows the user to control the unit through the control panel. Operational settings, optional parameters, troubleshooting and error information are controlled through this menu system.

The Barrel Status menu, shown in Figure 8, is the home screen for the unit. During normal operation, this screen is displayed on the control panel.

BARREL

#1 FREEZE

87

STATUS

#2 FREEZE

68

12:51P

 

 

MAR 04

 

 

 

 

 

 

 

MENU ON

OFF DFRST SPIN

 

Figure 8. Main Screen

 

Table 2

 

 

Button

Description

 

 

 

 

MENU

Displays the Main menu

ON

Turns on the highlighted barrel

OFF

Turns off the highlighted barrel

 

 

DFRST

Initiates a manual defrost on the highlighted barrel. Manual defrost is lim-

 

ited to a two minute cycle. If the barrel is off, this selection initiates a full

 

defrost cycle.

SPIN

Turns off refrigeration, if on and mixes the product in the barrel.

 

 

 

 

Main Menu

To access the menus for the system from the Barrel Status menu, press the MENU button. This displays the Select menu, shown in Figure 9. The Setup and Maintenance menus are accessed through the buttons shown at the bottom of the display.

NOTE: If security is turned on, the MAINT button is not displayed.

© 2010, IMI Cornelius Inc.

- 15 -

Publication Number: 621360041TBSER

Image 21
Contents Fruitista Viper 3 Flavor Trademarks and Copyrights Contact InformationSafety Instructions IntroductionSystem Overview Operation Preventative Maintenance Component ReplacementTroubleshooting Page Manual Overview IntroductionSafety Tips Read and Follow ALL Safety InstructionsSafety Overview Different Types of AlertsSafety Precautions Qualified Service PersonnelShipping and Storage CO2 Carbon Dioxide WarningOverrun, as Applied to Carbonated Beverages Mounting in or on a CounterDispensed Product Conditions Brix Affects Overrun Low Dispensing Volume Affects Overrun Introduction System OverviewTheory of Operation Fruitista Viper System 3-Barrel Refrigeration SchematicFruitista Viper 3-Barrel Wiring Diagram Typical Bulk Cylinder CO2 Connection CO2 SystemPsig Settings Syrup Viscosity CO 2 Setting Expansion Type SetBarrel System Schematic Syrup System Water SystemIntroduction Control PanelControl Panel Buttons Control Panel DisplayBarrel StatusSoftware Structure Main Menu System MenusControl Panel Menu Descriptions Button DescriptionUnit Data Menu Error Status Menu Error Type DescriptionDisplayed Action Type Description Message Fill Error BRL RecoverReset Comm ERR IOError Log Menu Setup MenuClock Setup Menu Setting the ClockAction Procedure Step Action Procedure Setting Daylight Sav- ings TimeEvents Setup Menu Event DAY SUN Setup SleepWakeup Setting the Sleep Wakeup Times Setting EventsSetting Defrost Lockout Viscosity Setup MenuDefrost Lock CO2 Setup Menu ViscCO2 Option Temp Format Setup Date Format Option Setup MenuTime Format USA EuroSetting the Temperature Format Setting the Date Format Maintenance MenuSetting the Time Format Setting the POS Light- ing Setting the Type of SyrupBrix Setup Barrel Maintenance Menu Purging a BarrelMotor Setup Select Barrel Maint Manual Diag TotalsFilling a Barrel Run the Barrel MotorRinsing a Barrel System Manual Diagnostic MenuOpen. The software is designed to turn on the hot gas sole Noid for a barrel to prevent damage from occurringDisplay Value Description Totals MenuBrix Setup Menu Brix Brix Setup ScreenMotor Setup Menu Eeprom is not installed or is faultyMotor Type CAL Calibrating a MotorSystem Menu Security Pressure SensorsNone LOW High Both Unit Line Voltage LOW Psig #1High Psig #1 Dispensed Product Throughput Maintaining Product QualityViper Viscosity CO2 Setting Viscosity SettingSleep Mode Recom- mendations Programmed Defrost SchedulingStarting the Unit Summary Preventative MaintenanceCleaning Air Filter Monthly MaintenanceStep Action Cleaning the Syrup Connections SEMI-ANNUAL MaintenanceInspecting and Replacing Scraper Blades Self-Closing Dispensing Valve Servicing Motorman Dispensing ValvesEmptying a Barrel Sanitizing the SystemProduct position Flushing the System of Syrup Sanitizing the BarrelPpm available chlorine Step Procedure Cleaning the Water FilterRemoving the Existing Seal Barrel Motor Seal ReplacementView of Motor Shaft with Spacer on Shaft Installing a New SealMotor Seal Leak Test Barrel Motor ReplacementView of Motor Run Capacitors Step Motor RUN Capacitor ReplacementRear View of Water Pump Water Pump ReplacementSide View of CO2 Pulse Valves CO2 Pulse Valve ReplacementView of Shutoff Solenoids w/ Access Panel Removed Syrup and Water Shutoff Solenoid ReplacementCompressor Replacement Condenser FAN Motor ReplacementHot Gas Solenoid 1 per barrel HOT GAS Solenoid ReplacementSyrup Pressure Switch Replacement Liquid Line Solenoid ReplacementView of Syrup Pressure Switch and Valve Water Pressure Switch ReplacementView of Display Board Display Board ReplacementSoftware Compatibility Control Board ReplacementView of Motor Board in E-Box Motor Board ReplacementProblem Probable Cause Remedy Troubleshooting the SystemTroubleshooting Product Not Cold Publication Number 621360041TBSER 2010, IMI Cornelius Inc Page IMI Cornelius Inc

3 specifications

Cornelius 3 is a cutting-edge platform designed to enhance communication and collaboration in the ever-evolving landscape of digital interaction. With an impressive range of features, technologies, and characteristics, it stands out as a vital tool for organizations looking to streamline their operations and enhance productivity.

One of the most notable features of Cornelius 3 is its intuitive user interface. Designed with user experience in mind, it provides a seamless navigation experience, enabling users to access various functionalities with ease. This ensures that both technical and non-technical users can quickly adapt to the platform without extensive training.

Cornelius 3 incorporates advanced artificial intelligence (AI) capabilities, enhancing the platform's effectiveness in facilitating communication. Its AI-driven algorithms analyze user interactions, providing tailored recommendations and insights that improve decision-making processes. This intelligent system is designed to learn from user behaviors, continually optimizing its responses and functionalities to suit individual and organizational needs.

The platform also boasts robust integration capabilities, allowing organizations to connect with a wide range of third-party applications. This flexibility is crucial in today’s interconnected environment, as businesses often utilize multiple tools to manage their operations. With Cornelius 3, users can consolidate their workflows and eliminate the need to switch between various applications, thus saving time and reducing operational friction.

Collaboration is further enhanced through Cornelius 3’s real-time communication tools. These include chat features, video conferencing, and collaborative document editing, empowering teams to work together seamlessly regardless of their geographical locations. This real-time functionality promotes quicker feedback loops and fosters a culture of collaboration that is essential in a work-from-anywhere world.

Security and data privacy are paramount in today’s digital age, and Cornelius 3 addresses these concerns with robust security features. Advanced encryption methods protect user data, and strict access controls ensure that sensitive information is only accessible to authorized personnel. This commitment to security builds trust among users and compliance with relevant regulations.

In conclusion, Cornelius 3 is a powerful platform that combines a user-friendly interface, advanced AI capabilities, seamless integration, real-time collaboration tools, and top-notch security features. These characteristics make it an invaluable asset for organizations looking to enhance their communication and operational efficiency in a digital-first landscape. With Cornelius 3, businesses can empower their teams, drive innovation, and achieve their goals more effectively.