INSTALLATION
GAS HOOK-UP
STEP 1
Place the tank restraint in the island (Fig. 11).
STEP 2
Locate the tank restraint in the island within the recommended area (Fig. 10 and 12).
STEP 3
Once located, secure to the bottom of the island using all eight hole locations provided on the restraint. Wood screws can be used for wooden floors or 1/4 inch diameter anchor screws or bolts may be used if the floor is concrete or masonry (Fig. 13).
STEP 4
When secure, place the LP cylinder into the tank restraint making sure to seat the tank all the way down, securely affixing the tank in the restraint (Fig. 14).
STEP 5
Attach the regulator hose assembly and operate the grill normally as described in the manual (Fig. 15).
FIG. 11
FIG. 12
FIG. 13
FIG. 14 | FIG. 15 |
15