Sharp R-350R manual Before Operating, Getting Started, Clock Setting, Stop/Clear

BEFORE OPERATING

*This oven is preset with the INFORMATION GUIDE.

To assist you in operating your oven, useful information will appear on the display. In this manual, the display information guide is abbreviated.

Getting Started

Step	Procedure	Pad Order			Display
1	Plug the oven into a power point and			MICRO-, WAVE, OVEN will
	switch on the power.			be displayed repeatedly.
	Ensure the oven door is closed.
	Press the STOP/CLEAR pad so that
2			STOP
	the oven beeps.
			CLEAR
				Only the dots will remain.

Clock Setting

* To enter the present time of day 11:34 (AM or PM).

Step	Procedure		Pad Order				Display
	Press the CLOCK pad twice.
1			TIMER		x 2
			CLOCK
2	Enter the correct time of day by
	pressing the numbers in sequence.
						The dots (:) will flash on and off.
3	Press the CLOCK pad again.
		TIMER		or	CLOCK
		CLOCK

This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45) ERROR will appear in the display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).

If you wish to know the time of day during the cooking or timer mode, press the CLOCK pad. As long as your finger is pressing the CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:

1.Stop the oven temporarily during cooking.

2.Clear if you make a mistake during programming.

3.Clear the message on the display after cooking.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.

6

R-350R [05-09].indd 6

10/22/09 1:28:55 PM