Overview of the Info Mode
The INFO MODE serves four main purposes:
1.To display oven information.
2.To provide access to TEST MODE and additional diagnostic tools for service technicians.
3.To turn oven options and features on/off.
4.To update oven settings.
To access the INFO MODE, simply press the Info key when the oven is either off or cooling down.
The INFO MODE consists of two screens. To toggle between screens, press the Up key or Down key.
From screen 1 of the INFO MODE (Figure 8):
-View the oven serial number
-View the oven software version
-View the menu part number and revision
-View the last temperature selected to cook
-View the electrical compartment temperature
-View the cook counter, total cook time, magnetron time, and total oven on time
-View the operating voltage (North America models only)
-Access the fault log
-Access service phone numbers
-Reset the oven
L1 | S/N: |
| COOKS: 257 | R1 |
L2 |
| R2 | ||
SOFTWARE VERSION | INFO 1 | 208 VAC | ||
L3 | MENU P/N AND REV |
| FAULT LOG | R3 |
|
|
| ||
L4 | LAST COOK: 500F |
| SERVICE NUMBERS | R4 |
|
|
| ||
L5 | ELECTRICAL: 84F |
| RESET OVEN | R5 |
|
|
|
Figure 8: Info Mode Screen 1
L1 | TEST MODE |
| LOAD MENU | R1 |
|
|
| ||
L2 | SET OPTIONS | INFO 2 |
| R2 |
L3 | SET LANGUAGE |
|
| R3 |
|
|
|
| |
L4 | SET DATE/TIME |
|
| R4 |
|
|
| ||
L5 |
|
|
| R5 |
Figure 9: Info Mode Screen 2
From screen 2 of the INFO MODE (Figure 9):
-Access TEST MODE
-Access the “Options” screen
-Set the language (not available on all models)
-Set the date/time
-Access the “Load Menu” screen
Viewing Cook Counter/Time Logs
From screen 1 of INFO MODE, press the R1 soft key:
-Once to display the cook counter.
-Twice to display total cook time.
-Three times to display total magnetron time.
-Four times to display total “oven on” time.
Viewing the Fault Log
Figures 10-11. This log is read-only. To zero the fault counters, see page 15. For more information on faults, see pages 37-38.
From screen 1 of the INFO MODE, press the R3 soft key to view the fault log (Figure 10). To view a detailed log of each fault occurrence (Figure 11), press the soft key adjacent to the fault code.
Viewing the Service Numbers
From screen 1 of the INFO MODE, press the R4 soft key to view the phone numbers for TurboChef Technical Support.
L1 |
| FAULT LOG |
| R1 | |
F1: BLOWER | 8 | F6: EC OT | 0 | ||
L2 | F2: LOW TEMP | 0 | F7: RTD OPEN | 0 | R2 |
L3 | F3: MAG C LOW | 0 | F8: HX RISE LOW | 0 | R3 |
L4 | F4: MONITOR | 0 |
|
| R4 |
|
|
|
| ||
L5 | F5: MAG OT | 0 |
|
| R5 |
|
|
|
| ||
Figure 10: Fault Log
L1 | F1 FAULT DETAIL | R1 | ||
|
| |||
L2 | 12/04/07 | 20:18 | R2 | |
09/26/07 | 17:42 | |||
L3 | 07/18/07 | 14:35 | R3 | |
07/15/07 | 08:36 | |||
|
| |||
L4 | 07/14/07 | 22:07 | R4 | |
07/14/07 | 13:54 | |||
07/14/07 | 05:22 | |||
L5 | R5 | |||
MORE | ||||
|
| |||
Figure 11: Fault Detail
13
OVEN CONTROLS AND COOKING