18 INFO MODE
Updating the Software | Smart Card | USB Port | |
From the Oven Off screen, |
| Smart Card Reader Slot | |
|
| ||
1. | Insert the smart card (see Figure 21). |
|
|
| If multiple smart cards are required, ensure |
|
|
| the correct smart card is loaded first. |
|
|
2. | From the COOLING DOWN or OVEN OFF |
|
|
| mode, press and hold the Info key until the |
|
|
| oven resets (approximately 5 seconds). |
|
|
3. | When the oven beeps one long high tone, |
|
|
| the load was successful. If a second card |
|
|
| was provided, insert it. |
|
|
4.When the oven restarts and the display turns on, the update is complete. Remove
the smart card. | Figure 21: Inserting Smart Card/USB Device |
NOTE: If the update is unsuccessful, the display will remain off and the oven will beep one long, low tone. If this occurs, repeat the above procedure. If the update fails multiple times, a smart card may be damaged. Contact TurboChef to obtain a new smart card.