IMPORTANT:
•The Refrigerator Control adjusts the refrigerator compartment temperature. The Freezer Control adjusts the freezer compartment temperature.
•Wait 24 hours after you turn on the refrigerator before you put food into it. If you add food before the refrigerator has cooled completely, your food may spoil.
NOTE: Adjusting the Refrigerator and Freezer Controls to a colder setting will not cool the compartments any faster.
•If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.
•The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
Digital Controls
For your convenience, your controls are preset at the factory. When installing your refrigerator, make sure the controls are still preset as shown. The digital control panel is located at the top of the refrigerator compartment and enables you to view the temperature control set points.
NOTE: The factory recommended set points are 0°F
To turn refrigerator on and view set points:
•Press and hold ON/OFF for 2 seconds.
Co_d | Freezer | OQ | Refrigerator | Co_(_ |
|
|
| o |
|
_ & _o | (o') | RECOMMENDE[_SEllING (37 _] | v | |
Co(der |
|
|
| Co(der |
To view the Celsius temperatures:
•Press the °C touch pad. The indicator will light up.
o®
NOTE: If the freezer temperature is below zero, the indicator light next to the freezer display will light up.
Adjusting Digital Controls
To adjust set point temperatures:
•Press the refrigerator or freezer up or down arrow until the desired temperature is reached.
Refrigerator Cold
[371 @
NOTE: Wait at least 24 hours between adjustments and then recheck the temperatures before other adjustments are made.
•The set point range for the freezer is
CONDITION: |
|
|
| TEMPERATURE |
|
|
|
| ADJ USTM ENT: |
REFRIGERATOR | too cold |
| REFRIGERATOR | |
- Not set correctly | for your | conditions | Control 1° higher | |
REFRIGERATOR | too warm |
| REFRIGERATOR | |
- High use or room very warm | Control 1° lower | |||
FREEZER too cold |
| FREEZER Control | ||
- Not set correctly | for your | conditions | 1o higher | |
FREEZER too | warm/too little ice | FREEZER Control | ||
- High use or heavy ice use |
| 1o lower | ||
Accelerated | Ice Production |
|
heavy ice usage by increasing ice production over a
•Press the ACCELERICE' touch pad to set the freezer temperature to
If increased ice production is desired at all times, set the Freezer Control to a colder setting. Adjusting the freezer to a colder temperature may make some foods, such as ice cream, harder.
SmartSense TM Temperature Management
The SmartSense TM feature assists with regulating the temperature inside the refrigerator. If a large quantity of warm food is placed in the refrigerator or warm air enters the refrigerator while the door is held open, SmartSense TM activates to quickly restore the temperature to the set point.
NOTE: SmartSense TM is always on when your refrigerator is operating. You do not need to press any buttons to activate it.
The LED light on the control panel indicates that the feature is functioning properly.
Control Lockout
Control Lockout disables the control touch pads to allow easy cleaning and prevent unintentional control setting changes.
s&g
•To disable the controls, press and hold the LOCK button for 2 seconds.
•To reactivate the controls, press and hold the LOCK button for 2 seconds again.
10